China

CHIJIU D2004W digital Overhead Stirrer digital display Stir power 40W

SE
The power is 40W, the speed range is 60~1500rpm, the clamping range of the rotary chuck is φ 1.0~10mm, the maximum distance of the chuck is 560mm, and the distance from the chuck to the column is 160-270mm.
$253.00/set
PromotionLoading...
Coupon
Model:

ChiJiu D2004W Overhead StirrerSPEC

ChiJiu D2004W Overhead StirrerDetails

ChiJiu D2004W Overhead StirrerPacking list

SKU
NB005433
Power
AC220V±10%
power
40W
Speed range
60~1500rpm
Rotary collet clamping range
F1.0 ~ 10mm
Collet maximum distance
560mm
Collet to column distance
160-270mm
D2004W
Overhead Stirrer
The power is 40W, the speed range is 60~1500rpm, the clamping range of the rotary chuck is φ 1.0~10mm, the maximum distance of the chuck is 560mm, and the distance from the chuck to the column is 160-270mm.
CHIJIU D2004W digital Overhead Stirrer digital display Stir power 40W  Picture

Product Description

D2004W digital display electric agitator is driven by brushless DC motor, which has no spark, high efficiency, large torque, very small temperature rise of the motor, and digital display of stirring speed.

product display

Chijiu D2004W digital display electric mixer display

Instructions

1. Installation: Install the column into the base and tighten it, tighten the screws, install the ten-byte on the column, and insert the cross-bar of the host into the ten-byte to fix;

2. Install the stirring rod before use. The stirring rod can be directly loaded into the chuck for clamping, but the straightness of the stirring rod must be ensured, and the stirring rod can be connected with a soft connection shaft;

3. Before turning on the machine, first put the power switch in the off position, turn the knob counterclockwise to the minimum, then plug in the power supply, turn on the power switch, the built-in indicator light of the switch is on, and the speed display is "0000", slowly adjust the knob clockwise to required speed.

Precautions

1. When the stirrer is used, it should be accelerated slowly from slow to fast. If the straightness of the stirring rod is poor, the speed cannot be fast or the flexible connecting shaft should be used and fixed with a support sleeve in the middle.

2. When the D2004W digital display electric mixer is working, please do not get too close to avoid dangers such as clothes and hair being involved;

3. Avoid liquid splashing when stirring.

FAQ
QWhat is the approximate diameter of the Development Blade?
A The standard is PTFE stirringrod. Development diameter is about 5cm
QDoes this one have a battery?
A Unworthy, they are all 220V.
QHello, laboratory Stir electric lift, test capacity 1-2L, is this suitable?
A Hello, it's OK.
QCan this powerbasic stirrer be applied to GB/T11543?
A OK
Knowledge
Standard