PUSHEN HGQ 2mm single-edged paint film cross-cut instrument, standard with 2 2mm single-edged cutter heads, 11 teeth

HGQ 2mm

Single Blade Cross Hatch Cutter

2Mm cutter tooth spacing, 11 teeth; 2 single-sided stainless steel cutter heads; wooden handle; suitable for 60-120um film thickness; in line with GB/T9286, ASTM/D3359 standards.

Introduction

Pushen HGQ 2mm single-blade paint cross-cut Tester is a cross-cut paint film cross-cut Tester with 11 teeth and a 2mm spacing between the blades. Adhesion. HGQ 2mm single-edged paint scratcher comes standard with two 2mm single-edged blades.

Standards

Comply with GB/T 9286 Paints and varnishes, scratch test of paint film, ISO 2409, ASTM D 3359 standards.

application principle

The paint film scratcher, also known as the hundred grid knife, is used to evenly draw a square of a certain size, and evaluate the adhesion of the coating film to the substrate by evaluating the integrity of the coating film in the square.

Paint film scratcher application

It is mainly used for the determination of the cross-hatch adhesion of coatings, not only for laboratories, but also for construction sites under various conditions.

Packing list：Cross Hatch Cutter x1, 3M tape x1, brush x1, magnifying glass x1, Encasement box x1, 2mm cutter head x2

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.