China

JINGKELIAN QND-4A Viscometer (Bakelite Cup) is suitable for measuring viscosity of Coating products under 150 seconds

SE
Outflow time 0~150s, flow hole diameter 4mm, capacity 100ml, Total height 72.5mm, cup body material bakelite, filter material stainless steel, Applicable standard GB/T 1723, flow hole length 4 +/- 0.02mm.
$117.00/piece
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con VIDEO OI
Similar products

JingKeLian QND-4A Painted 4 Viscometers (Bakelite)SPEC

JingKeLian QND-4A Painted 4 Viscometers (Bakelite)Details

JingKeLian QND-4A Painted 4 Viscometers (Bakelite)Packing list

SKU
NB000561
outflow time
0~150s
Flow hole diameter
4mm
Capacity
100ml
Total height
72.5mm
Cup body material
bakelite
Filter material
stainless steel
Applicable standard
GB/T 1723
Certificate
without
Outlet height
4±0.02mm
QND-4A
Painted 4 Viscometers (Bakelite)
Outflow time 0~150s, flow hole diameter 4mm, capacity 100ml, Total height 72.5mm, cup body material bakelite, filter material stainless steel, Applicable standard GB/T 1723, flow hole length 4 +/- 0.02mm.
JINGKELIAN QND-4A Viscometer (Bakelite Cup) is suitable for measuring viscosity of Coating products under 150 seconds Picture

Overview of QND-4A Tu 4 Viscometer

JinKeLian QND-4A Tu 4 viscometer is a kind of Viscosity Cup made of Bakelite. The outflow time of the paint used for testing is not more than 150s. It is a Tu 4 cup with a diameter of 4mm. The volume of the cup of QND-4A Tu 4 viscometer is 100ml, and the Viscosity Cup holder can be purchased separately for testing, which has better stability.

QND-4A Tu 4 viscometer (bakelite cup) is manufactured in accordance with the relevant provisions of the national standard GB/T1723-93 "Measurement of Paint Viscosity" and combined with actual production conditions. QND-4B Tu 4 viscometer (aluminum cup) is used to measure the conditional viscosity of paint, and it is suitable for measuring paint products with viscosity below 150 seconds.

Detail image

Real shot of QND-4A Viscosity Cup


FAQ
QApply 4 cups, what's the difference between these?
A 4A is a bakelite cup, 4B is an aluminum cup, and 4C is a copper cup.
QExcuse me, the four-cup bakelite cup is actually plastic, right?
A Bakelite cups are injection molded.
QCoating concentration is relatively strong, I don't know if the viscosity cup can be tested, the viscosity is about 8000?
A Hello, applying 4 cups can only measure the viscosity of 200mPa.s at most. Such a high viscosity should use Viscometer.
QI want to do a test on the JT/T821.3 standard. Can this one be coated with 4 Viscometer (bakelite)?
A Sure
QQND-4 copper viscosity cup and bakelite cup which is good?
A Hello, all 4 cups can be used to test Coating viscosity, and the materials are different. You can enter the two product pages of/p/563 and/p/561 to compare.
Standard
Filter Brand Store Contact