MOLECULAR MP-05L laboratory purified water equipment, water production rate 5L/h
SE
MP-05L
Molecular MP-05L Lab water purifierSPEC
Molecular MP-05L Lab water purifierDetails
Molecular MP-05L Lab water purifierPacking list
- SKU
- NB005812
- Inlet source
- Tap water, water pressure 0.1-0 MPa
- Power
- 220V/50HZ 80W
- Flow Rate
- 5L/h
- Flow velocity
- 0.8 L/min
- Host size
- 600*380*450mm
- Pure water storage bucket
- 2 gallons
- Operating Environment
- The water temperature is 5~ 40 ℃, and the northern region needs an antifreeze room.
- Application
- For laboratory physical and chemical quantitative analysis, buffer solution and high standard solution preparation, etc
Introduction
Moore MP-05L laboratory pure water machine is a special pure water machine used for laboratory physical and chemical quantitative analysis, buffer solution and high standard solution preparation, etc. The water production rate is 5L/h, and the water intake rate is 0.8L/min. The operation control of the MP-05L laboratory pure water machine adopts intelligent microcomputer control, touch buttons, operating status display, and online monitoring of water quality, fully realizing human-machine dialogue.
Device function configuration
Fully automatic microcomputer control, automatic water production, standby, alarm, flushing, etc., automatic timing anti-Graduation flushing of RO membrane, online display of water production resistivity, LCD display, automatic protection such as water outage, power outage, overload, etc.
1. RO membrane intelligent anti-Graduation scheduled flushing and manual forced flushing.
2. Automatic internal circulation system to maintain ultra-pure water quality.
3. Equipped with PE controllable 30-liter pure Water Tank.
The equipment uses: DOW membrane, ROHMHAAS ultra-pure resin, MOL filter element and carbon filter. SMC solenoid valves, E-CHEN booster and delivery pumps, PE pipe valves and fittings and PE Water Tanks, magnetic resistance meters, OMRON electronic control components, liquid level controllers, and intelligent controllers.
Pure water quality
The first type of water quality: GB Grade III pure water: used for cleaning experimental vessels and the most basic experiments.
The second type of water quality: in line with GB6682 Grade I water standard; online specific resistivity 14-16MΩ.cm, (online conductivity about 0.063-0.07μs/cm); silica <0.02mg/L; absorbance (254nm, 1cm light (Cheng): <0.001.
Structure diagram
Product display picture
- 1Ten common water treatment methods
- 2These five questions about consumables for laboratory water purifiers are very common!
- 3Analysis of the process flow of ultra-pure water machine
- 4What is the application of reverse osmosis membrane in ultra-pure water machine?
- 5Maintenance and maintenance methods of laboratory ultrapure water machine
- 6What is the parameter difference between ultrapure water and pure water?
- 7How does the ultrapure water machine store and export data?
- 8Molar reverse osmosis membrane performance parameters and cleaning and maintenance
- 9What experimental fields are laboratory ultrapure water machines used in?
- 10Explore new solutions for laboratory ultrapure water
- 1GB/T 31531-2025《Determination of quinoline and isoquinoline in dyestuffs and textile dyeing and finishing auxiliaries》
- 2GB/T 44184-2024《Stability tests for nitrocellulose mixtures》
- 3JG/T 572-2019《Fire retardant coating for timber structure in building》
- 4HG/T 3982-2007《Electrodeionization equipment for pure-water preparation》
- 5CJ/T 168-2002《Pure water system》
- 6GB/T 41899-2022《General quality requirements for coated tinplate and ECCS used in food container》
- 7GB/T 33401-2016《Determination of the urea in liquid fluorescent whitening agent products》
- 8HG/T 5776-2020《Water-based coatings for surface of rubber sealing products》
- 9CY/T 205-2019《Screen printing - Pigment dispersion paste for textile printing process control requirements and test methods》
- 10GB/T 9779-2015《Multi-layer coatings for architecture》