China

MOLECULAR MP-10L reverse osmosis (RO) water purifier with a water production rate of 10L/h

SE
MOLECULAR MP-10L reverse osmosis (RO) water purifier includes PP fiber filter, activated carbon filtrate, reverse osmosis (RO) membrane, purification column and other accessories, using intelligent microcomputer control, MP-10L water production rate 10L/h, water intake velocity Flow is 1.0L/min.
$2216.00/set
PromotionLoading...
Coupon
Model:
Certificate

Molecular MP-10L Lab water purifierSPEC

Molecular MP-10L Lab water purifierDetails

Molecular MP-10L Lab water purifierPacking list

SKU
NB005813
Inlet source
Tap water, water pressure 0.1-0 MPa
Power
220V/50HZ 100W
Flow Rate
10L/h
Flow velocity
1.0 L/min
Host size
600*380*450mm
Pure water storage bucket
3 gallons
Operating Environment
The water temperature is 5~ 40 ℃, and the northern region needs an antifreeze room.
application
For laboratory physical and chemical quantitative analysis, buffer solution and high standard solution preparation, etc
MP-10L
Lab water purifier
MOLECULAR MP-10L reverse osmosis (RO) water purifier with a water production rate of 10L/h Picture

Introduction

Moore MP-10L reverse osmosis pure water machine includes PP fiber filter element, activated carbon filtration, reverse osmosis membrane, purification column and other accessories. It is a special pure water machine used for laboratory physical and chemical quantitative analysis, buffer solution and high standard solution preparation, etc. , the water production rate is 10L/h, and the water intake rate is 1.0L/min. The operation control of the MP-10L reverse osmosis pure water machine adopts intelligent microcomputer control, touch buttons, operating status display, and online monitoring of water quality, fully realizing human-machine dialogue.

Device function configuration

Fully automatic microcomputer control, automatic water production, standby, alarm, flushing, etc., automatic timing anti-Graduation flushing of RO membrane, online display of water production resistivity, LCD display, automatic protection such as water outage, power outage, overload, etc.

1. RO membrane intelligent anti-Graduation scheduled flushing and manual forced flushing.

2. Automatic internal circulation system to maintain ultra-pure water quality.

3. Equipped with PE controllable 30-liter pure Water Tank.

The equipment uses: DOW membrane, ROHMHAAS ultra-pure resin, MOL filter element and carbon filter. SMC solenoid valves, E-CHEN booster and delivery pumps, PE pipe valves and fittings and PE Water Tanks, magnetic resistance meters, OMRON electronic control components, liquid level controllers, and intelligent controllers.

Pure water quality

The first type of water quality: GB Grade III pure water: used for cleaning experimental vessels and the most basic experiments.

The second type of water quality: in line with GB6682 Grade I water standard; online specific resistivity 14-16MΩ.cm, (online conductivity about 0.063-0.07μs/cm); silica <0.02mg/L; absorbance (254nm, 1cm light (Cheng): <0.001.

Structure diagram


Moore MP-10L reverse osmosis pure water machine appearance structure diagram

Moore MP-10L reverse osmosis pure water machine operation panel function diagram



Product display picture

Appearance of Moore MP-10L reverse osmosis pure water machine

Detailed view of the operation panel of Moore MP-10L reverse osmosis pure water machine


FAQ
QCan MP-10L reverse osmosis (RO) water purifier produce primary water?
A Hello, it's OK.
QLab water purifier can be applied to GB/T1740?
A OK
Knowledge
Standard