APPLENT AT518 Handheld DC Resistance meter 10μΩ~ 20MΩ Range
AT518
Applent AT518 DC resistance TesterSPEC
Applent AT518 DC resistance TesterDetails
Applent AT518 DC resistance TesterPacking list
- SKU
- NB005845
- Measurement parameter
- DC resistance
- Basic Precision
- 0.05%
- Measurement range
- 10μΩ~20MΩ
- signal source
- Maximum current: < 1A Current mode: high current, low current
- range
- Ten-scale automatic, manual, and nominal testing
- Test speed
- 30 times/second, 15 times/second, 3 times/second
- Show results
- Absolute deviation (ABS) comparison, relative deviation (PER) and sequential (SEQ) comparison
- Maximum reading
- 20000
- correction
- Short circuit clearing in full scale
- comparator
- Built-in sorting record, GD/NG sorting result display
- trigger method
- Internal trigger, manual trigger, remote trigger
- test side
- 4-Terminal Shielding (including 2 detection terminals and 2 drive terminals) and outer Shielding ground terminals
- temperature compensation
- Precision: 0.2 ℃ Temperature range: 0~80 ℃
- standard interface
- Built-in Mini-USB interface (virtual serial port)
- other
- 3.5-Inch true color 16M color TFT-LCD display; keypad lock, data retention function; compatible with SCPI Instruction Set Architecture; Chinese and English switching; backlight adjustment; automatic shutdown, U disk recording function
- Power adapter
- Input: 100-240V~ 50/60Hz 0.35A Output: 9V 1A DC
- Battery parameters
- 8.4V, Li, 2200mAh rechargeable battery
- Charging time
- Charging time: 300Min max.
- Battery operating life
- ≥ 8 hours
- size
- External Dimensions (mm): 130.23 (W) x 210.76 (H) x 37.88 (D)
- Weight
- 650g
Introducing the AT518 Handheld DC Resistance Meter
AT518 handheld DC low resistance Tester is a high-precision wide-range, high-performance 32-bit ARM microprocessor control of fully automatic real-time detection of micro handheld instrument, in any occasion to achieve accurate and convenient measurement of passive components for a long time. The instrument can test the resistance of 10μΩ~20MΩ, and the maximum number of displays is 20000. It has a current test mode, which can be adapted to different requirements of the test. It is equipped with Mini-USB communication interface for remote control and data acquisition and analysis. AT518 adopts 3.5" high-definition LCD large screen display, large font display is more convenient for you to read data, and the built-in high-capacity lithium battery can be used for a long time standby, which is more convenient for you to take mobile measurements for a long time.
The AT518 handheld low resistance Tester can measure a variety of high, medium and low value resistors; The instrument has a built-in temperature compensation module, which can compensate the temperature of temperature-sensitive devices. The AT518 handheld low resistance Tester can easily measure various switch contact resistances; Connector plug-in resistor; relay wire wraps and shock resistors; Winding resistors for transformers, inductors, motors, and deflection coils; wire resistance; Metal riveting resistors, printed board lines and porosity resistors for cars, ships, and airplanes.
performancefeatures
● Fresh and dazzling two-color injection molded shell
● Battery and external power supply power supply
● Automatic shutdown function
● Built-in Mini-USB interface
● Compatible with SCPI instruction set
● Keypad lock function
● Switch between Chinese and English
● Backlight adjustment
● Auto shutdown setting
● Long continuous working time≥8h
Display diagram
Application
● Measure all kinds of high, medium and low value resistors
● Various switching contact resistors
● Enameled wire resistor
● Connector contact resistance
● Relay wire wrap and contact resistance
● Winding resistors for transformers, inductors, motors, and deflection coils
● Solder joint contact resistance
● Wire resistance
● Metal riveting resistors for vehicles, ships and aircraft
● Printed plate lines and porosity resistors
● Characterize the low-resistance characteristics of electromechanical components
AMBE DC Resistance Tester Selection Table
