YUEPING DSJ-5 Hydrostatic balance measurement solids by volume and density 0~5000g

DSJ-5

Hydrostatic balance

Weighing range 0~5000g, Readability 0.1g, Power supply Voltage AC-DC dual-use, weighing method, Interface RS232C.

Introduction

Yueping DSJ-5 hydrostatic balance is an electronic balance specially designed for earthwork engineering. It has a novel and beautiful appearance, is equipped with a Water Tank, a pan support, and is equipped with universal wheels, so it is easy to operate. With the technical performance of precision electronic balance and superior cost performance, it is the preferred choice of users. The Weighing range of DSJ-5 hydrostatic balance is 0~5000g, and the minimum reading is 0.1g

The main parameters

main feature

It is used to measure the density and volume of solid samples. Coupled with humanized design, novel structure and convenient operation, it is composed of electronic balance and hydrostatic device. The performance of precision electronic balance makes it have a high cost performance. Improve the safety of weighing, to meet the needs of different occasions indoors and outdoors.

all functions

Rich and powerful functions, with automatic calibration, tare, zero tracking, unit conversion, piece counting, percentage and other functions.

AC and DC dual-purpose, output interface.

Installation Notes

1. Unpack the DSJ-5 hydrostatic balance package, hydrostatic stand, hanging basket and bucket. And adjust the adjusting feet below the still water frame to keep the frame basically level.

2. Open the package box of the balance, take out the balance, and put it on the still water shelf, place the rubber feet and the adjusting feet on the bottom of the balance in the sink holes on the shelf, adjust the balance adjusting feet, and keep the balance and the still water stand flat.

3. There are power cords and stainless steel hooks in the packaging box of the balance. There is a ring connected to the sensor on the bottom of the balance. When it needs to be used, the two ends of the hook hook the ring and the stainless steel hanging basket. If it is necessary to weigh in the liquid, the hanging basket should be placed in a plexiglass bucket, which can be placed as Liquid as needed.

Weighing operation

1. After starting up, warming up and stabilizing or calibrating, put the weighing object on the weighing pan, and wait for the black dot at the bottom left of the display to disappear, then you can read the mass of the object.

2. The maximum weighing capacity of the DSJ-5 hydrostatic balance is the maximum value displayed on power-on + 9d (d is the minimum reading displayed). After the maximum weighing value is exceeded, the horizontal line "------" on the display indicates the cumulative weighing If it exceeds the specified range, it should be weighed immediately, otherwise the balance will be damaged.

Packing list：Balance x1, hydrostatic rack x1, hanging basket x1, bucket x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.