DECO DECO - PBM - H - 2/4/6 L - A Light Planetary Ball mill horizontal

DECO-PBM-H-2/4/6L-A

Light Planetary Ball mill horizontal

Introduction:

DECO light horizontal planetary ball mill has higher uniformity and accuracy than vertical planetary ball mill when realizing the ultra-fine grinding of samples, the ball mill tank is lying down for high-speed planetary operation, the friction and impact energy generated by the sample and grinding ball under the action of gravity and centrifugal force can be more intense, and the contact area has also increased, which effectively prevents the material from sinking to the bottom and stickiness and enhances the degree of material refinement. The light horizontal planetary ball mill is widely used in coating homogenization, metal alloying, organic and inorganic sample refinement, etc., and can be widely used in various industries such as food, environmental protection, materials, coatings, metallurgy, teaching, etc.;

Operating Principle:

   The horizontal design of the ball mill tank increases the energy generated by the gravity of the grinding ball, and the centrifugal force generated by the high-speed rotation of the planetary disc and the ball mill tank itself makes the material, the grinding ball and the wall of the ball mill tank produce violent friction, impact and shearing, and the material achieves good crushing, mixing and homogenization effects in this complex and huge energy; 

Application examples:

   Calcite, chalk, limestone, kaolin, bentonite, talc, mica, magnesite, illite, pyrophyllite, vermiculite, sepiolite, attapulgite, retolite, diatomaceous earth, barite, gypsum, alum stone, graphite, fluorite, phosphate rock, potassium ore, pumice, ......

Indicator parameters:

Application fields: food, chemical industry, beauty, glass, textile, electronics, teaching, scientific research, etc 

Sample characteristics: heavy, ultra-light, high viscosity, strong, corrosive, easy to oxidize, etc

Crushing principle: friction, impact, shear

Grinding structure: horizontal/planetary

Dry grinding: Yes

Wet grinding: Yes

Vacuum Mill: Yes

Low Temperature Mill:-

Inert Gas Mill: Yes

Booster Mill: Yes

Crushing time: 20-30min

Maximum feed size: 15mm

Discharge size: 0.1um

Maximum grinding volume of batch: 1000ml/2000ml/4000ml/6000ml 

Number of grinding platforms: 4pcs

RPM ratio: 2:1

Ball mill pot speed: 800r/min

Planetary disk diameter: 360mm

Planetary disk thickness: 8mm

Ball mill jar type: conventional/vacuum

Ball mill jar material: stainless steel, nylon, polypropylene, ultra-high density polyethylene, PTFE, polyurethane, corundum, zirconia, agate, cemented carbide, etc

Ball mill jar size: 250ml/500ml/1000ml/1500ml

Grinding ball material: stainless steel, polyurethane, nylon, corundum, alumina, cemented carbide, etc

Grinding ball size: 2-30mm

Functional modes: forward operation (time can be set), reverse operation (time can be set), forward and reverse alternate operation, intermittent operation (time can be set), timing grinding (time can be set), pause, stepless speed regulation, emergency stop, restoring, etc

Grinding time setting: digital display, 00:00:01 to 99:59:59

Pause time setting: digital display, 00:00:01 to 99:59:59

Intermittent operation time setting: digital display, 00:00:01 to 99:59:59 

Drive: inverter, three-phase AC motor

Drive power: 0.75kw

Drive Voltage: 110-120V/220-240V

Frequency: 50-60Hz

Power connector: single phase

Body size (L*W*H): 760*560*720mm

Net weight: 85kg

Gross weight: 108kg

Degree of protection: IP53

Standard: CE

Accessories: pressure rods, tools, lubricants, manuals, warranty cards, certificates

Process characteristics:

1>. The delicate baking paint process of each part of the interior and exterior resists rust aging;

2>. The beautiful mechanical appearance design also focuses on practicality, and the compact internal structure better controls the volume of the equipment;

3>. Planetary discs, tank holders, pressure rods and other components use more complex wire cutting processes to improve the accuracy, service life and safety performance of parts;

4>. The ball mill jar tray is made of thickened 6mm seamless steel pipeline cutting and sprayed plastic, which will not break and is durable;

5>. The heat dissipation system ensures that the device dissipates heat properly;

6>. Good inverters and motors provide higher stability and safety to the equipment;

7>. The use of silencing gears reduces the noise of operation;

8>. The bin cover is equipped with pneumatic support; 

9>. The pressure rods are all made of 304 material, which is safe and durable;

Packing list：

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.