DECO DECO - PBM - V - 2/4/6 L - B Combined Light Planetary Ball mill Vertical

Combined Light Planetary Ball mill

Introduction:

   "DECO-PBM-V-2L-B" is a 2L\4L\6L general light vertical planetary ball mill, which is a derivative of the "DECO-PBM-V-A" light planetary ball mill. While ensuring the roundness of the shell and the luster and texture of the spraying treatment through exquisite and rigorous production technology, the internal structural layout has also been carefully adjusted to ensure the rationality of the space structure. In terms of core components, the equipment still uses Delixi brand inverter as the control system, and the power also uses Dedong brand motor, which provides a strong guarantee for the stability of the equipment;

Operating Principle:

Four ball mill jars are assembled on the planetary disk, when the planetary disc rotates at high speed, the ball mill tank moves planetarily on the central axis, and the grinding ball in the ball mill tank violently collides and rubs the material in the high-speed movement, so that the material is fully crushed, homogenized and mixed. According to the different properties of the grinding materials, various grinding methods such as dry grinding, wet grinding, vacuum grinding, low temperature grinding, and inert gas grinding can be selected for grinding;

Application examples:

Electronic ceramics, structural ceramics, magnetic materials, lithium cobalt oxide, lithium manganese oxide, catalysts, phosphors, long afterglow luminescent powder, rare earth polishing powder, electronic glass powder, fuel cells, ceramic capacitors, zinc oxide varistors, piezoelectric ceramics, nanomaterials, disc ceramic capacitors, MLCC, thermistors (PTC, NTC), ZnO varistors, arrester valves, strontium titanate ring varistors, ceramic filters, dielectric ceramics, piezoelectric transducers, piezoelectric transformers, chip resistors, thick film circuits, pyroelectric potentiometers, alumina ceramics, zirconia ceramics, phosphors, zinc oxide powder, cobalt oxide powder, Ni-Zn ferrite, Mn-Zn ferrite and other products

Process characteristics:

 1. Combined structure, flexible disassembly and assembly, easy to maintain and repair;

 2. The grinding room has a wide operating space;

 3. The planetary tank tray is made of seamless wire cutting process, which is sturdy and durable, and effectively prevents high-speed breakage;

 4. The pressure rod is made of 304 stainless steel, no rust, can be used for a long time, is firmly pressed, and has a high safety factor;

 5. The core components of Delixi inverter and Dedong motor, durable and stable;

 6. Equipped with two 200CFM cooling fans, good heat dissipation;

 7. Low center of gravity design, smooth ground contact, to ensure stable operation;

Performance Advantages:

 1. According to the grinding amount, there are three specifications: 2L, 4L, 6L;

 2. Dry grinding, wet grinding, vacuum, pressurized grinding, inert gas grinding, low temperature grinding can be used.

 3. Under the same conditions, the grinding effect of multiple times is the same, and the grinding effect of each ball mill jar is the same for a single batch of grinding;

 4. The grinding time is short, and the discharge particle size can reach 0.1um;

 5. Wide range of grinding sample types;

 6. The control system has various functions and simple operation; With power-off protection and memory function;

 7. Simple to use and easy to maintain

Performance indicators:

 Application: crushing, grinding, mixing, homogenizing, polishing, etc

 Application fields: electronics, beauty, chemical industry, ceramics, glass, metallurgy, teaching, scientific research, etc

 Sample characteristics: hard, brittle, dry, wet, viscous, fibrous, fluid, corrosive and easy to oxidize, etc

 Crushing principle: friction, impact

 Dry grinding: Yes

 Wet grinding: Yes

 Vacuum Mill: Yes

 Low Temperature Mill: Yes

 Crushing time: 15-20

 Maximum feed size: 15mm

 Discharge size: ≥0.1um

 Maximum grinding capacity of batch: 1000ml 2000ml 4000ml 6000ml

 Number of grinding platforms: 4pcs

 RPM ratio: 2:1

 Ball mill speed: 800r/min

 Noise standard: 50-60 decibels                

 Planetary disc diameter: 340mm

 Planetary disk thickness: 6mm

 Ball mill tank type: practical, vacuum, low-temperature type

 Ball mill jar material: stainless steel, nylon, polypropylene, ultra-high density polyethylene, PTFE, polyurethane, corundum, zirconia, agate, cemented carbide, etc

 Ball mill tank volume: 0.25L/0.5L/1L/1.5L

 Grinding ball material: polypropylene, ultra-high-density polyethylene, stainless steel, polyurethane, nylon, corundum, alumina, cemented carbide, etc

 Grinding ball size: 2-30mm

 Functional modes: forward operation (time can be set), reverse operation (time can be set), forward and reverse alternate operation, intermittent operation (time can be set), timed grinding (time can be set), pause, stepless speed regulation, emergency stop, reset

 Grinding time setting: Digital display, 00:00:01 to 99:59:59

 Pause time setting: Digital display, 00:00:01 to 99:59:59

 Intermittent operation time setting: Digital display, 00:00:01 to 99:59:59 

 Drive: inverter, three-phase AC motor

 Drive Voltage: 110-120V/220-240V

 Drive power: 0.75kw

 Frequency: 50-60Hz

 Power connector: single phase

 Degree of protection: IP53

 Standard: CE

 Accessories: pressure rods, tools, lubricants, manuals, warranty cards, certificates

 Size(L*W*H): 480*580*760mm

 Net weight: 85kg

 Gross weight: 102kg

Packing list：

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.