China

Pushen HGQ 1mm Single Blade Cross Hatch Cutter for Determination of Adhesion by Coating Cross-cut Method

SE
1mm + 2mm tooth spacing; 11 teeth; 2 single-sided stainless steel cutter heads; wooden handle; suitable for 0-120um film thickness; in line with GB/T9286, ASTM/D3359 standards.
$179.00/set
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con VIDEO CAT OI
Similar products

Pushen HGQ Single Blade Cross Hatch CutterSPEC

Pushen HGQ Single Blade Cross Hatch CutterDetails

Pushen HGQ Single Blade Cross Hatch CutterPacking list

SKU
NB000651
Number of teeth
11 teeth
Tooth spacing
1mm、2mm
Handle material
hardwood
application standard
GB/T 9286、ASTM D 3359
HGQ
Single Blade Cross Hatch Cutter
1mm + 2mm tooth spacing; 11 teeth; 2 single-sided stainless steel cutter heads; wooden handle; suitable for 0-120um film thickness; in line with GB/T9286, ASTM/D3359 standards.
Pushen HGQ 1mm Single Blade Cross Hatch Cutter for Determination of Adhesion by Coating Cross-cut Method Picture

Paint film scratcher parameters:

Model: HGQ 1mm*100 grid and 2mm*100 grid (tooth spacing 2mm, number of teeth 11)

Application: hard substrate test piece less than 60μm

Packing: 1 scriber, 1 roll of 3M adhesive tape, 1 brush, 1 magnifying glass, 1 packing box, 1mm and 2mm blades each

Application principle of single-edged paint film scratcher:

The paint film scratcher, also known as the hundred grid knife, is used to evenly draw a square of a certain size, and evaluate the adhesion of the coating film to the substrate by evaluating the integrity of the coating film in the square.

Paint film scratcher application

It is mainly used for the determination of the cross-hatch adhesion of coatings, not only for laboratories, but also for construction sites under various conditions.

The single-edged paint scratcher complies with the standards:

Comply with ISO 2409, ASTM D 3359 related standards, and also apply to GB/T 9286 "Cross-cut determination of paint and varnish film"

Model list:

The multi-blade cutting knife with 1mm spacing is suitable for hard substrate test pieces with paint film thickness less than 60μm.

The multi-blade cutting knife with 1.5mm spacing is suitable for hard substrate test pieces with a paint film thickness of 30 to 90 μm.

The multi-blade cutting knife with 2mm spacing is suitable for hard substrate test pieces with a paint film thickness of 60 to 120μm.

The multi-blade cutting knife with 3mm spacing is suitable for hard substrate test pieces with a paint film thickness greater than 120μm.

Single-edged scratcher order:

HGQ 1mm*100 grid (tooth spacing 1mm, number of teeth 11)

HGQ 2mm*100 grid (tooth spacing 2mm, 11 teeth)

HGQ complete set of paint scratcher:

1 scribe, 1 roll of 3M adhesive tape, 1 brush, 1 magnifying glass, 1 packing box, 1mm and 2mm blades


FAQ
QIs there a corresponding test tape?
A With a 3m tape.
QHGQ 1mm single-blade Cross Hatch Cutter, is there any specification for the tape of this tape? I see that only 3M is written in the instructions.
A 3M has special adhesion tape. The width is 19mm.
QCan HGQ Single-blade Cross-Cut Tester test coating adhesion on soft substrates?
A Hello, no, the objects tested by the scratcher are all hard substrates, such as tinplates.
QTo test UV ink adhesion, Screen Printing ink, Film thickness is 30 microns, choose which scratcher?
A Hello, if it is less than 60 microns, you can consider using a scratcher with a 1mm knife tooth spacing.
QIs the HGQ Cross-Cut Tester equipped with two knife heads of 1mm and 2mm?
A Hello, yes, the Pushen/Pushen HGQ 1mm single-blade Cross-Cut Tester comes with two knife heads.
QWhat is the number of teeth in each of the two knife heads of the HGQ Cross-Cut Tester?
A Hello, the number of teeth of the 1mm and 2mm knife heads is 11.
QDo you have the Single Blade Cross Hatch Cutter involved in ISO2409?
A The HGQ Single Blade Cross Hatch Cutter will do
QExcuse me, what is the width of the 3M tape with this model?
A Hello, the width of the 3M tape used is 19mm.
QWhat does multi-edged/single-edged refer to?
A Hello, the single-edged single head is flake, and the single-edged scribe is equipped with 2 blades for users to use (11 teeth. Generally, it is equipped with one 1mm and one 2mm each, and it can also be equipped with 2 1mm blades or 2 2mm blades); the multi-edged knife head is cylindrical, and the multi-edged scribe is only equipped with one knife head (the user can choose 6 teeth/11 teeth, and the knife tooth interval is 1/2/3mm).
QDoes this Cross-Cut Tester need to be calibrated?
A Hello, for the quality control of the production product, it needs to be calibrated after a period of use. During the cutting process, the knife teeth may be abrasion or distorted. Microscope or image measurement can be used for calibrating.
Standard
Filter Brand Store Contact