MODERNER CCQ thick paint, putty consistency Tester GB1749 standard
SE
CCQ
Moderner CCQ Thick paint, putty consistency TesterSPEC
Moderner CCQ Thick paint, putty consistency TesterDetails
Moderner CCQ Thick paint, putty consistency TesterPacking list
- SKU
- NB000674
- Pump inner diameter
- F29.7mm
- Pump depth
- 29mm
- Pump Volume
- 20.07ml
- Glass plate size
- The 200mm × 200mm × 6mm plate is engraved with red line circles of φ50mm to φ160mm.
- Glass plate size
- The 200mm × 200mm × 6mm board has a notch at φ30mm and φ160mm.
- Nominal Mass
- 2000g±10g
MODERNER CCQ thickness Tester for thick paint and putty is a simple Tester for measuring the consistency. It is equipped with a pump, a glass plate and a weight. Through a simple pressure test, observe the spread of the sample to determine the consistency of the paint film. It is suitable for paint, coating, putty and other industries.
Application of CCQ thick paint and putty consistency Tester
The CCQ thick paint and putty consistency Tester is designed and manufactured according to the national standard GB1749 "Measurement of Thick Paint and Putty Consistency". For the determination of thick paint or putty consistency.
The Principle of thick paint and putty consistency Tester
Take a quantitative volume sample, and after a certain period of time under a fixed pressure, its consistency is expressed by the diameter of the sample flow and diffusion.
Photographs of thick paint and putty consistency Tester
How to use thick paint and putty consistency Tester
(1) Place the lower glass plate on a flat test bench, place the pump in the center of the glass (with the scored side facing down), fill the pump with a paint knife and scrape the sample flat. (No gaps are allowed in the sample)
(2) Use the pump plug to squeeze out the sample in the pump. (Note that the pump should be lifted up while pressing the pump plug) and cut off the sample on the pump plug with a paint knife and place it in the center of the glass plate.
(3) Align the center of the circle of the upper glass plate with the center of the sample, and gently place it flat on the sample, then lightly place the weight on the center of the upper glass plate, and start the stopwatch at the same time, take it off after one minute Weight, observe the scale on the circle where the sample spreads on the glass plate, and record the diameter in centimeters, which is the test result. (If it is an ellipse, take the average of its major and minor axes)
Precautions
1) The test should be carried out under the conditions of constant temperature and humidity, or under the conditions agreed by the relevant parties.
2) After the test, the glass plate, pump, and pump plug should be cleaned with solvent, (do not scrape with metal tools) into the box, and placed in a dry place for the next use.