EMK-LS1501 Automatic mixing equipment for ultra-thin Magnetic Stirrer laboratory

EMK-LS1501

Magnetic Stirrer

Introduction

LS1501 one-way ultra-thin magnetic stirrer is an automatic mixing equipment for the laboratory, which can stably stir all kinds of water/oily liquids, and is an experimental tool required in the fields of modern petroleum, chemical industry, environmental protection, biochemistry, experimental analysis and education and scientific research.

Parameters

Operating Principle

The magnetic stirrer is mainly suitable for long-term stirring of low-viscosity test fluids in the laboratory, and can also be encapsulated in a closed container. The principle of a magnetic stirrer is to use magnetic force to drive the stirring rotor for stirring. It is composed of trays, containers, stirring rotors, magnets, motors and other devices. The stirring rotor is shaped like a cylinder, and the stirring rotor is placed at the bottom of the fluid in the container and rotated by a rotating magnet under the tray to stir.

Material

Stirrer material: ABS/siliconeStirrer material: PTFE

Application features

The output power of EMK-LS1501 unidirectional ultra-thin magnetic stirrer is only 3w, its speed can reach up to 1500rpm, the maximum stirring capacity of the experiment can reach 1000ml, the weight can reach 1.5kg, and it can operate normally in most environments (temperature 20-50°C, humidity less than 80), which is the best choice for laboratory equipment.

Advantages

EMK-LS1501 ultra-thin magnetic stirrer adopts professional electromagnetic stirring technology, which is stable and reliable.

The fuselage disc surface is anti-slip and shock-absorbing design, and the shell is resistant to acid and alkali corrosion.

The speed is stable and the stirring is smooth.

Built-in rechargeable lithium battery, easy to use.

The operation is simple, one key to turn on or off.

Compact and lightweight, easy to carry.

How to use:

(1) Inject an appropriate amount of solution into the beaker, do not overfill to prevent spilling;

(2) Put in the stir bar;

(3) Press the power button and the agitator starts to work;

(4) After stirring, disconnect the power button;

(5) Attach magnetically to the outside of the cup wall and suck the stir bar and take it out.

Precautions

1. Do not place mobile phones, watches, magnetic cards, etc. on the magnetic stirrer.

2. Do not immerse the magnetic stirrer in water.

3. Please keep the accessories out of the reach of children to avoid accidental ingestion.

4. After stirring, please suck the stir bar with a magnetic tape and take it out.

5. After use, please turn off the power in time to prevent the power from running out.

Product detail drawing

EMK-LS1501 magnetic stirrer is developed and produced by Emicon, authorized to be sold by Nanbeichao Network, welcome to buy.

Common Problem Solving

1. The stirrer beats in the cup and cannot be stirred normally.

Method: Turn off the power switch, wait for about 15 seconds, then turn on the power switch and start stirring.

2. The USB charging port indicator does not light up.

Method: There is a phenomenon of battery drain, it is recommended to use it after charging for the first time. The red light is on, charging is on, and the green light is on, charging is complete.

Packing list：host x1, data cable x1, magnetic stirring rotor x3, magnet x1, charger x1, manual x1, certificate of conformity warranty card x1.

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.