MODERNER LGB sags for inspection of Coatings or Paints

LGB

SAG board

The LGB type sag board is designed with four uniform volume spherical concave holes for placing samples or master standards, which simply realizes the quantitative requirements. The concave hole volume is 1.29cm3, and the film thickness range is 0~10inch; Metric 1~ 25cm.

product description

Sag is a description of paint and paint defects. When constructing on a vertical or inclined surface, during the period from coating film to drying, due to the downward movement of the wet film, the thickness of the coating film is uneven, and the phenomenon that the lower part forms a thick edge is called sagging.

For the determination of sagging characteristics, a common method is to place a certain amount of sample or standard sample on a flat plate, then place the flat plate vertically or obliquely for a certain period of time, and determine it by simply comparing and observing the sagging traces or performing related tests. of. The LGB type sag plate is designed to adapt to this determination method.

Through the determination of the sagging property, it can be checked whether the formulation of the paint or paint is reasonable and whether the construction method is correct.

The structure and Specifications of LGB type flow hanging board

The LGB type sagging plate is designed with four spherical concave holes of uniform volume for placing samples or standard samples, which simply meets the quantitative requirements; the high-gloss processing surface makes the sagging traces more objective; metric and imperial markings The scale marks make it easier to observe and evaluate the sagging marks; the stainless steel material is used for easy cleaning and maintenance.

Concave volume: 1.29cm³

Scale range: Imperial 0~10inch; Metric 1~25cm

Dimensions: 304×202×8mm

Weight: 3.8kg

Precautions for use of LGB sag board

1. The reproducibility of the measurement method depends on: a stable climate environment and setting the same evaluation time during the measurement.

2. After use, do a good job of cleaning and maintenance in time; use and storage should be handled with care to avoid bumping and falling.

3. The sag plate is used to measure chemical raw materials. Users should establish appropriate safety and health protection measures and determine rules and regulations according to relevant regulations before use. Safety issues related to contact with chemical raw materials should be established by the user and are not within the scope of this manual.

Pictures

Packing list：SAG board x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.