BOZHEN 101-4AS digital Forced Air Drying Oven stainless steel liner Power 7KW

101-4AS

Digital stainless steel Drying Oven

Introduction

The inner tank of Bozhen 101-4AS digital blower Drying Oven is made of 304 stainless steel, and the maximum working temperature is 300°C. The size of the studio is 800x800x1000mm, which can be used for various prototypes. It is suitable for baking, drying, heat treatment and other heating, and can be used in industry or in laboratories. (However, it is not suitable for items with toys to be placed in a Drying Oven to avoid detonation and explosion)

The working temperature of the 101-4AS digital blower Drying Oven can be raised from room temperature to the maximum temperature, and the working temperature can be arbitrarily selected within this range, and the temperature can be kept constant by the automatic control system in the box after selection.

It is equipped with an electric blower to promote the mechanical convection of hot air in the room, making the indoor temperature more uniform. This series of Drying Ovens adopts intelligent digital thermostat to control the temperature, which is more precise than the old-fashioned thermal expansion controller, and the reading is intuitive, high sensitivity, easy to operate, and it is a satisfactory drying equipment for factories and scientific research units and other enterprises.

Structural

1. The box has a studio for placing the sample, there is a sample shelf in the studio, the sample can be placed on it for drying, if the sample is larger, the shelf can be removed, there is a considerable thickness of insulation between the studio and enclosure, and the glass fiber is used as the insulation material. There is a glass door inside the door for observation of the situation in the studio.

2. Opening the exhaust valve can change the air in the studio and obtain freshness, and it can also be connected to the exhaust gas duct to make the indoor air not affected.

3. The temperature is automatically controlled by the digital display controller PID, and the thermostat, relay and all electrical control equipment are installed in the control layer on the side of the box, and the control layer has a side door that can be removed for inspection or repair of the line.

Product display

System Composition Description

Packing list：Machine X1, Shelf X2, Operation Manual X1, Warranty Card X1, Certificate of Conformity X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.