ShenyangTX 934-1 Pap Hardness Tester with flat feet, suitable for aluminum and aluminum alloy, frp

934-1

Pap Hardness Tester

Overview of the 934-1 Barcol Hardness Tester

Shenyang Tianxing934-1 Barcol Hardness Tester,Also known as Barcol Hardness Tester and Bakel Hardness Tester, it is a portable Barcol Hardness Tester with 100 scales, which has higher sensitivity than Webster Hardness Tester and has an effective measuring range35-90HBa, pointer.934-1 Barcol Hardness TesterIt is mainly used for rapid hardness inspection of aluminum, aluminum alloy and FRP. The 934-1 Barcol Hardness Tester is quick and easy to operate without any training or experience, has a wide measuring range, and can be operated with one hand, allowing testing to be completed by touching one side of the specimen.

Common applications for 934-1 Barcol Hardness Testers are:Narrow or cylindrical products such as aluminum rods and fire ladders.

934-1 Barcol Hardness Testerpeculiarity

1. Easy to use: one-handed operation, easy to use, high efficiency, can be used on any occasion.

2. High sensitivity: The pasteur Hardness Tester has 100 scales, and the sensitivity is higher than that of the Webster Hardness Tester.

3. Wide range of hardness measurement: from pure aluminum to super-hard aluminum alloy.

4. The pressure needle has a long life and good interchangeability.

5. Screw rod:The screw mechanical knot with complex and precise process is adoptedto ensure that the longevity and reliability of the instrument are far highIn other countries that adopt plastic gear transmission structureProduce a Barcol Hardness Tester.

6. Hardness block:Each of the 934-1 Barcol Hardness Testers is included and sold separatelyThe pieces of Pasteur hardness are imported directly from the United Statesmouth, to ensure the accuracy of the Barcol Hardness Tester reading,Stability, consistency.

7. Die-casting alloy shell: fast, beautiful, good grip.

8. Easy conversion:With the Barcol hardness conversion table attached to the manual,The Barcol hardness value can be easily converted to Wechsler,Brinell, Rockwell, Vickers and other hardness values. 935、The Babbitt hardness value of the rubber material measured by the 936 type is acceptableConverted to Shore hardness value.

Typical Barcol hardness values for common aluminum alloy materials

Relevant standards

Model 934-1 Barcol Hardness Tester Conforms to CHINA's National Metrology Verification Regulations JJG 610-2013 "Type A Barcol Hardness Tester"

Packing list：Host x1, Pap Hardness block x2, spare pressing needle x2, correction wrench x1, foot x1, instrument box x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.