Ipre PRUT310 Ultrasonic Thickness Gauge brochure

Related products

PRLH320 Leeb Hardness Tester
170-960HLDHRC、HRB、HV、HB、HS360º (vertical down, slope down, horizontal, slope up, vertical up)

¥1999.0
SE
IPRE Ipre SR130 Groove Sensors
Groove SensorsIt can measure the surface roughness of grooves with a groove width greater than 2mm and a groove depth of less than 3mm, or the surface roughness of steps with a height of less than 3mm, and can also measure flat and cylindrical surfaces.

¥2600.0
SE
PRUT600 Ultrasonic Thickness Gauge penetrating coating thickness measurement
0.15~ 10mm (steel) (E-E mode), 0.75~ 25.4mm (I-E mode)5/10/15/20MHzSplit probe

SE
ZKP Ipre SR100 Standard Sensors
Standard SensorsRoughness measurement of planar and cylindrical surfacesThe minimum diameter of the hole is 5mm and the maximum depth is 22mm when measuring the inner surface of the hole.

¥1600.0
SE
IPRE SC3020 one-button image Measurement Instrument, measuring range 300mm
X sentire:300mm;Y sentire:200mm;Z sentire:20mmHaikang 20 million pixels0.88X

¥106300.0
SE
IPRE C Impact device measurement of small thin specimens and surface hardening layer
2.7mJ3.0g1600HV

¥580.0
SE
IPRE BH200M-W Computer-based Metallurgical Microscopy (excluding computer)
Optical inspection system for color difference correction30 ° tilt, hinged trinocular observation cylinder, 360 ° swirl/spin, pupil distance adjustment range: 50-75mm, bilateral vision adjustment: +/- 5 diopters, fixed spectral ratio, binocular: trinocular = 80:20.High eye point and large field of view flat field eyepiece PL10X/18mm

¥10800.0
SE
PRUT210 Ultrasonic Thickness Gauge Film thickness range 0.75~ 225mm
0.75~225mm7.5/5/2/H3MHzSplit probe

SE
Impact measurement of slender narrow groove bottom
11mJ7.2g1600HV

¥1999.0
SE
IPRE CT150 Coating Thickness Gauge Measurement range 0~1500μm
F、NMagnetic Induction (F), eddy Current (N)F: 0~1500μm; N: 0~1500μm (of which: chrome plating on copper 0~40μm)

¥1050.0
SE

Recommended for more brochure