Ipre PRUT600 Ultrasonic Thickness Gauge brochure

Related products

PRUT600 Ultrasonic Thickness Gauge penetrating coating thickness measurement
0.15~ 10mm (steel) (E-E mode), 0.75~ 25.4mm (I-E mode)5/10/15/20MHzSplit probe

SE
PRUT210 Ultrasonic Thickness Gauge Film thickness range 0.75~ 225mm
0.75~225mm7.5/5/2/H3MHzSplit probe

SE
Impact measurement of slender narrow groove bottom
11mJ7.2g1600HV

¥1999.0
SE
IPRE XY5040Q image Measurement Instrument, travel 500mm
X sentire:500mm;Y sentire:400mm;Z sentire:200mm(3+L/200)μm1μm

¥71300.0
SE
ZKP Ipre SR131 Deep Slot Sensors
Pinhole SensorsRoughness of the inner surface of the hole with an aperture greater than 2mm can be measured, the maximum depth is 9mm, and the plane cylinder can also be measured.

¥2500.0
SE
IPRE XY3020Q image Measurement Instrument, stroke 300mm
X sentire:300mm;Y sentire:200mm;Z sentire:200mm(3+L/200)μm1μm

¥56300.0
SE
IPRE4XC Metallurgical Microscopy Objective Lens 5X/10X/20X/60X
Double cylinder tilt is 30 °55mm~75mmLarge field of view eyepiece 10X (field of view Φ16mm); 10X flat field reticle eyepiece (grid value 0.1mm)

SE
PRLH210 Leeb Hardness Tester Hardness range 170~960HLD
170~960HLDHL/HRC/HRB/HV/HB/HS±6HLD (HLD=760±30)

SE
IPRE C Impact device measurement of small thin specimens and surface hardening layer
2.7mJ3.0g1600HV

¥580.0
SE
IPRE RA150 asperity Profile Gauge resolution 0.02μm
Movement Accuracy: ≤ 0.5μm/80mmResolution: 0.1 μm; Origin: ChinaResolution: 0.02μm; Origin: Imported grating

¥75050.0
SE

Recommended for more brochure