Formed, wet film thickness 60μm, diameter 10mm, Total length 60mm, application width 60mm, grip width 0, material 304 stainless steel.
Japan OSP-60/60 paint wire stick is a laboratory-specific coating tool for preparing 60 micron thickness. It is simple in structure, easy to operate, and can realize ultra-thin film coating. The coating prepared by the coating rod can be used to test its hiding power, color, anti-cracking, scrub resistance, drying time, color correction and other performance applications. The continuous development of the chemical industry and the diversification of detection performance are important for The demand for coating sticks is also increasing. The exquisite workmanship and easy cleaning of Japanese OSP coating sticks have also been recognized by many users in the industry.
Optional
Note: Click on the accessory picture to view Details.
Packing list:Stainless Steel Main Rod X1, Transparent External Encasement Hose X1
[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
QAre all Mayer Rods available for detection in the ASTMD823 standard?
A
Not necessarily, but this OSP-60/60 Mayer Rods can be considered.
QWe use emulsion paint to measure covering power, just built laboratory, any suggestions?
A
Using Mayer-Rod to prepare emulsion paint coating on covering power cardboard is a common practice and can be applied. If you need to get good experimental results, you can buy American RDS Mayer-Rod and Leneta covering power test paper.
QCan this scraper be used to coat organic polymer conductive films?
A
Yes, the specific selection can be selected by the appropriate rod number corresponding to the rod model and film thickness, by optimizing a series of factors such as wet film thickness, Spreader speed, surfactant concentration, ethylene glycol concentration, film heat treatment temperature, etc., so that It is worth the conductive film compound requirements.