Pushen ZS-200 manual Ink Proofer Roller 200LPI line, quadrangular pyramid mesh shape

ZS-200

Manual Ink Proofer

The number of reticulated lines is 200 lines, the shape of the mesh hole is quadrangular pyramid, the anilox roller is made of stainless steel, the width of the printing surface is 70mm, and flexo printing and gravure printing are applied.

Introduction

Pushen/Pushen ZS (28016) color development wheel has an anilox roller line number of 200LPI, which is used to apply gravure printing, aniline ink or other liquid coatings on various substrates to obtain reproducible samples. The color wheel is composed of a metal anilox roller, a rubber roller and a handle. The handle is made of stainless steel, which is not easy to rust. The entire color wheel has a simple structure, easy operation, and easy coating and proofing.

Specifications

Note: The line number unit of the color wheel is represented by LPI, that is, Lines per Inch: line number/per square inch.

( The number of lines of the metal anilox roller is inversely proportional to the thickness of the wet film, that is, the larger the number of lines, the smaller the thickness of the wet film )

Features

1. Pushen color wheel is composed of metal anilox roller, rubber roller and handle.

2. The color wheel is widely used in ink color proofing of ink, flexo printing and gravure printing.

3. ZS ( 2 8 0 16) color display wheel is novel, easy to use, convenient and intuitive, and has strong proofing authenticity.

4. Tools needed for gravure printing and aniline ink production.

5. The singular number of color wheel lines is represented by LPI, that is, Lines per Inch: number of lines/per square inch.

real shot

Product maintenance method

1. Use a mesh microscope to check the mesh regularly

2. Check the ink viscosity and clean the anilox roller in time

3. When the ZS ( 2 8 0 16) color wheel anilox roller is not in use, use the anilox roller protective cover for storage

4. Use a good scraper and control the pressure between the scraper and the anilox roller. If conditions permit, put a magnetic filter in the ink tank to reduce the impurity particles in the ink and reduce the wear of the anilox roller. Extend its service life.

How to choose the appropriate anilox roll line number?

1. Solids, lines, text, etc. require a large amount of ink, so choose a lower number of screen lines; a color screen pattern requires a small amount of ink, and choose a higher number of screen lines.

2. The fineness of printed matter depends on the number of screen dot lines. It is better to maintain a ratio of about 4:1 between the screen line number of the ZS ( 2 8 0 16) color wheel anilox roller and the screen dot line number of the printing plate.

3. Generally, if the ink absorption is high, choose the one with a low number of texture lines; if the ink absorption is small, choose the one with a high number of texture lines.

Full model parameter table

Packing list：Manual Ink Proofer (including metal reticulated and rubber) x1, cross screw driver x1, instruction manual x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.