China

SDC STM-IVB Stormer Viscometer KU/CP/G

SDC STM-IVB Stormer Viscometer can display Krebs unit KU, gram G unit, centipoise CP three Viscosity units, the measurement viscosity range of 40~141 KU, STM-IVB Stormer Viscometer is a digital Viscometer, in line with ASTM D562 standard.
Model：
Certificate
Contact
Details SPEC VIDEO OI
Similar products

SDC STM-IVB Stormer ViscometerSPEC

SDC STM-IVB Stormer ViscometerDetails

SDC STM-IVB Stormer ViscometerPacking list

SKU
NB008243
Display mode
digital display
Measurement range
40~141KU，32~1099g，27~5274cP
Unit display
KU/g/cP
Swirl/spin speed
200rpm
Repeatability
±1%F.S
Precision
±1.5%F.S
Power supply Voltage
220V AC 50Hz 16W
Environmental temperature
0~40℃
Dimensions
150*110*750mm
Instrument Weight
10kg
printer output
Print through the host computer software
Working Relative Humidity
20~80% non-condensing
Speed Accuracy
±0.1rpm
Lifting method
Lever lift
STM-IVB
Stormer Viscometer
SDC STM-IVB Stormer Viscometer KU/CP/G Picture

Introduction

Comparison of the Sedchan STM-IVB Stormer viscometerThe STM-IV model adds centipoise (cP) units, which can support the display of Krebs units, gram units, and centipoise units, and measure viscosity in the range40～141 KU、32～1099 grams, 27~5274cP.The STM-IVB Stormer Viscometer uses a 200RPM constant speed motor to rotate a paddle rotorReaction torque at 200RPM is converted to Krebs singleThe viscosity value of the bit.The STM-IVB display is a digital display display, which is intuitive and clear.Equipped with a 500ml glass container.

Instrument composition

The STM-IVB Viscometer includes the following accessories

(1) STM-IVB Viscometer Vertical Rods and Base                                  （2）One 500ml glass container

(3) Paddle rotor                                                               （4）Power cord 250 VAC one

(5) 500ml glass container holder small (6) data cable HL-340

(7) The 500ml glass container holder is large                                         （8）Operating Manual (SDC/04-659)

Front view and side view of the Sedchang STM-IVB Stormer viscometer

Rear view of the Sedchan STM-IVB Stormer viscometer

Product display diagram

Image of the Sedchang STM-IVB Stormer viscometer

Side view of the Sedchan STM-IVB Stormer viscometer

FAQ
QIs this Stormer Viscometer dedicated to testing Coating Printing ink viscosity?
A Hello, yes.
QCan this Stormer Viscometer be applied to GB/T9269?
A OK
QWhat happens when STM-IV viscosity measurement exceeds the viscosity range?
A The instrument can not measure more than the maximum range of the sample, otherwise it will affect the accuracy of the instrument.
QHow is the rotor of the STM-IVB Stormer Viscometer installed?
A Hello, to install the rotor, first loosen the Viscometer spindle airfoil screw and insert the paddle rotor into the inside end of the Viscometer spindle. Make sure the grooves on the rotor line up with the hole where the thumb screw enters. Tighten the thumb screw.
QHow can I transfer the data of STM-IVB Viscometer to my computer?
A Hello, connect the data cable, just lift the handle and send the data to the computer.
Knowledge
Standard