MODERNER Frame 100/200/300/400 Large Frame Applicator wet-Film Applicator 90mm

Frame type 100/200/300/400 (groove width 90mm)

Large Frame Applicator

Wet film thickness 100/200/300/400μm, Spreader width 90mm, material: stainless steel, not easy to rust, longer service life, suitable for Coating inks industry film.

Introduction to Frame Applicators

MODERNER Frame Applicators are divided into large Frame Applicators and small Frame Applicators. The groove width of the large Frame Applicator is larger than that of the small Frame Applicator. MODERNER frame type 100/200/300/400 large frame type Applicator has three groove widths of 60mm, 80mm, and 90mm, and the coating film thickness is 100 μm , 200 μm , 300 μm , and 400 μm. This frame type 100/200/300/400 Applicator is a model with a larger groove width. It is made of stainless steel, which is not easy to rust and has a longer service life. It is suitable for coating film in the paint and ink industry.

Parameter comparison

Steps

1. Put the template on the platform and fix it so that the Frame Applicator does not move when it slides over.

2. Select the preparation of the appropriate wet film thickness, and place it on the short side of the sample, close to parallel or at a specified position.

3. Pour about 5 ml of the sample in front of the frame-type 100/200/300/400 large frame-type Applicator, press both ends of the Applicator with your fingers, and slide at a constant speed of 150 mm/s to finally get the desired The wet film of the wet film thickness.

4. After use, the frame type 100/200/300/400 large frame type Applicator should be cleaned with a suitable solvent, and the surface should be coated with oil or Vaseline.

Applications

Frame type 100/200/300/400 The large frame type preparer is used to coat wet film with a specified thickness to measure the hiding power, color and luster of the sample or prepare a sample, etc.

Pictures

Packing list：Applicator x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.