TROPHY /OTZ 75x125x0.8mm with 7mm hole Cold rolled steel plate (thin steel plate) thickness 0.8mm

75X125x0.8 (with 7mm hole)

Cold rolled steel plate (thin steel plate)

Introduction

Twards 75x125x0.8 (with 7mm holes)Cold-rolled steel plate (thin steel sheet)It is a thin steel plate with rounded corners and holes with a size of 75x125mm and a thickness of 0.8mm, and the raw material is Baosteel first-class cold-rolled plate. 75x125x0.8 (with 7mm holes)Cold-rolled steel plateIt is used for environmental resistance testing of industrial coatings, including acid resistance, alkali resistance, salt spray resistance, and aging resistance. The surface treatment of the cold-rolled steel plate is the most important factor in the experiment.

Parameters

Note: The cold-rolled steel plates sold in Nanbeichao Mall are sold in whole packages, with 400 pieces per package (free shipping including tax).

Meets standards

75x125x0.8 (with 7mm holes)Cold-rolled steel plateIn line with the technical requirements of GB912 ordinary carbon steel, the surface treatment is polished according to the requirements of GB9271.

Features

1. 75x125x0.8 (with 7mm hole)Cold-rolled steel plateIt is a die stamping and forming, and the size is accurate.

2. Rounded corners are rectangular with 7mm holes and no burrs on the edges.

3. The surface of the cold-rolled steel plate is covered with anti-rust oil

Packing list：Thin steel plate x1 (1 pack of 400 pieces)

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.