TROPHY /OTZ 70x150x0.8mm with 7mm hole Cold rolled steel plate (thin steel plate) thickness 0.8mm

70X150x0.8 (with 7mm hole)

Cold rolled steel plate (thin steel plate)

Introduction

Twards 70x150x0.8 (with 7mm holes)Cold-rolled steel plate (thin steel sheet)It meets the technical requirements of GB912 ordinary carbon steel, the surface treatment meets the requirements of GB9721, and the first-class cold-rolled plate of Baosteel is used as raw material. 70x150x0.8 (with 7mm holes)Cold-rolled steel plateIt is a thin steel plate with rounded corners and punched holes with a size of 70x150mm and a thickness of 0.8mm.

Parameters

Note: The cold-rolled steel plates sold in Nanbeichao Mall are sold in whole packages, with 400 pieces per package (free shipping including tax).

Practical application of standards

70x150x0.8 (with 7mm holes)Cold-rolled steel plate (thin steel sheet)It is used in the experiment of standard GBT 1765-1979 "Preparation method of paint film for determining damp heat resistance, salt spray resistance and weather resistance (artificial acceleration)".

Applications

70x150x0.8 (with 7mm holes)Cold-rolled steel plateIt is used for environmental resistance testing of industrial coatings, including acid resistance, alkali resistance, salt spray resistance, and aging resistance. The surface treatment of cold-rolled steel plate is the most important influencing factor for the inspection results.

Features

1. 70x150x0.8 (with 7mm hole)Cold-rolled steel plateIt is a die stamping and forming, and the size is accurate.

2. Rounded corners are rectangular with 7mm holes and no burrs on the edges.

3. The surface of the cold-rolled steel plate is covered with anti-rust oil

Packing list：Cold rolled steel plate x1 (1 pack of 400 pieces)

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.