MODERNER 500/600/750/900 Cube Applicator 50X50 film thickness 500/600/750/900μm

500/600/750/900

Cube Applicator 50X40

Introduction

Modern Environment 500/600/750/900 Square Preparator 50X50 has a coating film thickness of 500/600/750/900μm and a groove width of 40mm. The square Applicator is a Wet Film Applicator with a hollow center in the cube. It is made of 9Cr18Mo stainless steel, which is not easy to rust and corrode and has good wear resistance.

Specifications

How to operate

1. Place the sample on the platform and fix it so that it cannot move when the Square Applicator 50X50 slides over it.

2. Place the Square Applicator 50X50 on the short side of the template, close to parallel or at a specified position.

3. Pour about 5 ml of sample in front of the Applicator, hold both ends of it with your fingers, and slide it at a constant speed of 150 mm/second to obtain a wet film with the required wet film thickness.

4. After using the Wet Film Applicator, immediately clean and dry it with a suitable solvent, and apply oil or Vaseline on the surface.

Applications

The square Applicator 50X50 is used to prepare wet films with specific wet film thickness, measure hiding power, color and prepare samples, etc.

Product actual pictures

Packing list：Cube Applicator x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.