AOLILONG 65-1 PH meter composite electrode Temperature range 0~80 ℃
SE
AOLILONG 65-1 PH meter composite electrode is specially equipped with PHB-3 (65-1 type) pH Meter, Measurement range is 0~14.0pH, 65-1 type is suitable for special solution pH value measurement, such as bone plasma and other thick viscosity liquids.
AOLILONG Type 65-1 PH meter composite electrodeSPEC
AOLILONG Type 65-1 PH meter composite electrodeDetails
AOLILONG Type 65-1 PH meter composite electrodePacking list
SKU
NB008938
Ambient Temperature
0~80℃
Ambient Temperature
5~45℃
Type 65-1
PH meter composite electrode
Introduction
Orilon 65-1 pH meter composite electrode is specially used with PHB-3 (65-1) pH meter. The measurement range is 0~14.0pH. Type 65-1 is suitable for measuring the pH value of special solutions, such as bone pulp. Liquid of equal viscosity.
[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
QCan thick liquids be measured?
A
Yes, with 65-1 electrode.
QGlass electrode heating to 180 or 120 degrees Celsius?
A
The temperature of the tested liquid is recommended to be below 90 degrees. If the temperature is high, the electrode is easy to break. Glass may be broken at such a high temperature.
QRecommend a pH meter, I do not require high accuracy, but the data should be stable, mainly for measurement of water-based paints, viscous, easy to clean
A
PHS-3C with 65-1 Glass electrode, easy to clean
QIs the electrode soaked in potassium chloride?
What if it dries up later?
A
Inside the electrode case is potassium chloride,
After drying, you can match it yourself. 24.6 grams of potassium chloride analysis pure ➕ 100ml distillation water or purified water
QDo you need to calibrate the ph meter before each use?
A
Twice a week.
QCan this AOLILONG PH meter composite electrode correspond to GB/T11165?
A
Yes, please refer to the NBchao standards page for specific standards.