China

EYESKY ES10B00-VOC (0~10000ppm) Fixed VOC Tester

EYESKY ES10B00-VOC fixed VOC Tester is the use of light ion detection principle, Measurement range 0~10000ppm, ES10B00-VOC fixed VOC Tester is an upgrade of ES10A.
Certificate
Contact
Details SPEC CAT OI

EYESKY ES10B00-VOC（0~10000ppm） Stationary VOC Detector SPEC

EYESKY ES10B00-VOC（0~10000ppm） Stationary VOC Detector Details

EYESKY ES10B00-VOC（0~10000ppm） Stationary VOC Detector Packing list

SKU
NB009184
Detect gas
VOC、TVOC
Detection principle
PID photoion
Detection method
Fixed on-line long-term continuous detection, diffusion detection method;
range
0~10000ppm
resolution
0.01ppm
Accuracy
≤ +/- 2% (Actual concentration, higher Accuracy required according to Sensors performance)
Operation mode
Infrared remote control for remote and close operation, easy to set up
Repeatability
≤±0.5%
Zero drift
≤ +/- 1% (F. S/year)
Response time
≤15s(T90)
recovery time
≤ 20 seconds
Explosion-proof sign
Exd II CT6
Protection level
IP66
Output signal
Users can be determined according to the actual site environment needs, up to 2000 meters (single core 1mm2 Shielding cable)
main material
Shell: ADC12 aluminum alloy, strong, wear-resistant and corrosion-resistant (316 stainless steel shell is optional)
Installation method
Wall-mounted pipe integrated type (pipe type external thread specification: M45X1.5mm, optional pipe transfer screw joint, can be welded)
Operating temperature
-30 ℃~ + 60 ℃ (special requirements need to be customized)
Operating humidity
≤ 95% RH, no condensation (Humidity > 90% RH, condensation can be equipped with Filter)
Relative Humidity
10%~95%RH
Power Supply
24VDC (Normal Operating Voltage range 12~ 30VDC)
power consumption
1.5W
Working pressure
≤200Kpa
Dimension
180*140*92mm
Weight
About 1.6Kg
execution standard
GB15322.1-2003，GB3836.1-2010，GB3836.2-2010，GB3836.4-2010
ES10B00-VOC（0~10000ppm）
Stationary VOC Detector
EYESKY ES10B00-VOC (0~10000ppm) Fixed VOC Tester Picture

Introduction

Visionless ES10B00-VOC (0~10000ppm) fixed VOC Tester is a new Gas Detector created by Visionless Technology on the basis of ES10A, using original imported sensors and new 32-bit low-power processors; The dashboard display interface, the value and the progress bar are displayed at the same time, which is beautiful and generous; The circuit adopts 4 layers of wiring, which is stronger against weak signals and anti-interference; Independent high-precision imported 16-bit AD chip and signal processing algorithm, higher accuracy and more stable measurement data; 4~20mA, RS485, 200~1000HZ a variety of output signals can be selected, easy to access various alarm controllers, PLC, DCS and other control systems; The explosion-proof structure design can be applied to various dangerous industrial sites; The products are widely used in metallurgy, petroleum and petrochemical, municipal, chemical and other industries.

Features

◆ Original imported high-performance sensor, good stability and repeatability, long service life;

◆ Independent 16-bit AD chip, 4-layer circuit board design, stronger ability to weak signal and anti-interference;

◆ The dashboard display interface is designed, the reading is beautiful and generous, and the humanized detail design is reflected;

◆ White, orange and red backlight design, normal and alarm status indication, clear at a glance;

◆ mg/m3, ppm, VOL, LEL can be selected;

◆ Embedded 32-bit ultra-low power processor, with independent signal processing algorithm, fast response speed and high measurement accuracy;

◆ Automatic protection function against high-concentration gas impact, with factory reset to prevent misoperation;

◆ The instrument is equipped with infrared remote control, which can be operated by remote control, without opening the cover, which is simple and convenient;

◆ Three-wire 4~20mA, RS485, 200~1000HZ signal output optional, relay output, data recovery, data storage and other functions;

◆ Two cable inlets, convenient for on-site installation;

◆ Independent air chamber structure, easy sensor replacement, no need for on-site calibration;

◆ Very good mechanical design, the air chamber is made of high-strength aluminum profile of military quality, wear-resistant and corrosion-resistant, suitable for complex and harsh industrial environments, reasonable and scientific air chamber design, to ensure the accuracy of real-time monitoring of the sensor;

◆ The explosion-proof grade is Exd II CT6, which is certified by the National Explosion-proof Electrical Inspection Center.

Display diagram

Visionless ES10B00-VOC Fixed VOC Tester Diagram

FAQ
QI want to do a test on the GB/T23985 standard, is this VOC detector okay?
A Sure
QES10B00-VOC fixed VOC detector test response time how long?
A Hello, no more than 15s.
QIs there an Eyeless ES10A VOC detector? The test range is 0~ 10000ppm.
A Hello, there is no ES10A model, but ES10B00-VOC (0~ 10000ppm) is its upgrade, you can take a look. https://www.nbchao.com/p/9184/
Knowledge
Standard