YIHENG DKZ-2C low temperature oscillation tank Temperature range 10~99 ℃
SE
Temperature range 10~99 ℃, Temperature Fluctuation +/- 1 ℃, Temperature resolution 0.1 ℃, Temperature control mode Microcomputer PID control, circulation mode internal/external circulation, Total Power 1500W, Power supply Voltage AC220V 50HZ, Tank Size 438 * 310 * 250mm, Speed range 30~150rpm
30mm or 40mm optional (to be indicated in the indent)
DKZ-2C
Thermostatic Water Bath
Temperature range 10~99 ℃, Temperature Fluctuation +/- 1 ℃, Temperature resolution 0.1 ℃, Temperature control mode Microcomputer PID control, circulation mode internal/external circulation, Total Power 1500W, Power supply Voltage AC220V 50HZ, Tank Size 438 * 310 * 250mm, Speed range 30~150rpm
Introduction of DKZ-2C low temperature oscillating Water Tank
Yiheng DKZ-2C low-temperature oscillating Water Tank is used for laboratory research with high requirements for oscillation and temperature accuracy, and the experimental environment is relatively low temperature. The temperature range of DKZ-2C low temperature oscillating Water Tank is 10~99℃, and the input power is 1500W.
Application
DKZ-2C low-temperature oscillating Water Tank can be used for bacterial culture, fermentation, hybridization, chemical and biochemical reactions, enzyme and tissue research, etc.
Features and advantages
1. Stainless steel liner and top cover are used, which are anti-corrosion and easy to clean.
2. Microcomputer PID temperature controller, accurate and reliable temperature control, with timing.
3. Carry out heating and drying test.
4. Over-temperature sound and light tracking alarm, so that the samples are reliably protected and no accidents occur.
5. The DKZ-2C low-temperature oscillating Water Tank adopts an AC geared motor with stepless speed regulation, which can directly drive the shaking table, and has high linearity and low noise.
Multi-segment programmable controller (optional)
1) Microcomputer program controller, time and heating rate, to carry out constant temperature test at an extremely fast speed.
2) 15 sections and 30 steps can be preset, and the setting time of each section is 1~99 hours and 59 minutes.
3) Multi-segment programmable control can simplify the complex test process and truly realize automatic control and operation.
[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
QWhat is the limit low temperature of this DKZ-2C Thermostatic water bath?
A
YIHENG DKZ-2C meets the Temperature range of 10 to 99 ° C, with a minimum temperature of 10 ° C.
QDoes the YIHENG thermostatic sink meet the FZ/T50010.3 standard?