China

JINLONG 50μm wire rod

The Wire diameter of the JINLONG 50μm wire rod is 0.6μm.
Model:

JinLong 50μm Wire rodSPEC

JinLong 50μm Wire rodDetails

JinLong 50μm Wire rodPacking list

SKU
NB000959
Production process
Wire-wound
WFT
50μm
diameter
10mm
Total length
400mm
Application width
300mm
grip width
50+50mm
material
stainless steel
50μm
Wire rod
JINLONG 50μm wire rod Picture

Schematic diagram of Jinlong Machinery 54μm wire rod coating film

Introduction

Jinlong Machinery 50μm wire rod is a 50 micron wire wound wire Bar Coater, the coating width is 30cm, and the surface contains electroplating to ensure that the coating rod is more wear-resistant and has a longer service life. The diameter of the steel wire of the 50μm wire rod is 0.6mm, and the diameter of the steel wire corresponding to different wire rod models is different, and the thickness of the coating film is also different. The wire rod can be used for coating film sample preparation in colorant, varnish, ink and other industries.

Parameters

ModelWire diameter (mm)Wet film thickness (μm)Length (mm)Diameter (mm)remark
50μm0.65040010Electroplated included

Actual picture of the product

Jinlong Machinery 50μm line rod real shot 1

King Long Machinery 50μm wire rod specification and size drawing

Jinlong Machinery 50μm line rod real shot 2

Jinlong Machinery 50μm line rod real shot 3

Jinlong Machinery 50μm line rod real shot 4

Jinlong Machinery 50μm line rod real shot 5

Jinlong Machinery 50μm wire rod real shot 6

Optional

实验涂膜测试卡纸

压印床涂布台

Laboratory small automatic Film Applicator

FAQ
QMy percent solids are 45 percent, and I want to apply Dry-Film 23 microns. Can this bar do it?
A Sure
QHello, the wire rod has not been used for a while, and something similar to rust is found on the steel wire. How do you need to clean this?
A Hello, this generally does not rust. It may be caused by oxidation caused by sweat on the hands at ordinary times, and no one takes care of it for a long time. Generally, there is Electroplated coating on the steel wire. When using it, you can wear cloth gloves, which cannot damage the Electroplated coating; in addition, it cannot be damp. If you find rust, you can wipe it off with water. Thank you!
Knowledge