JINLONG 60μm wire rod
The diameter of the steel wire of the JINLONG 60μm wire rod is 0.7mm.
Model：
JinLong 60μm Wire rodSPEC
JinLong 60μm Wire rodDetails
JinLong 60μm Wire rodPacking list
- SKU
- NB000960
- Production process
- Wire-wound
- WFT
- 60μm
- diameter
- 10mm
- Total length
- 400mm
- Application width
- 300mm
- grip width
- 50+50mm
- material
- stainless steel
60μm
Wire rod
Introduction
Jinlong Machinery 60μm wire rod is similar to Pushen wire rod winding coating rod, the same stainless steel material, the thickness accuracy of the coating film is 1 micron, suitable for experiments that do not require high-precision coating film thickness, etc., in coatings, inks, plastics, resins and other industries, coating film sample preparation, measurement of hiding power, color and other properties, all are not a problem!!
Parameters
| Model | Wire diameter (mm) | Wet film thickness (μm) | Length (mm) | Diameter (mm) | remark |
| 60μm | 0.7 | 60 | 400 | 10 | Electroplated included |
Actual picture of the product
FAQ
QWe use emulsion paint to measure covering power, just built laboratory, any suggestions?
A
Using Mayer-Rod to prepare emulsion paint coating on covering power cardboard is a common practice and can be applied. If you need to get good experimental results, you can buy American RDS Mayer-Rod and Leneta covering power test paper.
QThe solid content is almost 36%. I want to make Dry-Film 22 microns. Is this model suitable?
A
suitable
Knowledge
- 1How to ensure consistent Film thickness?
- 2Wire Bar _ Spreader (Spreader Tool) Category
- 3What are the advantages of Spreader?
- 4Code of use for coating rods
- 5Spreader wet film thickness conversion
- 6Coating construction performance testing Application instrument type summary
- 7Preparation method of film