JINLONG 90μm wire rod
The steel Wire diameter of the JINLONG 90μm wire rod is 1mm.
Model：
Similar products
JinLong 90μm Wire rodSPEC
JinLong 90μm Wire rodDetails
JinLong 90μm Wire rodPacking list
- SKU
- NB000963
- Production process
- Wire-wound
- WFT
- 90μm
- diameter
- 10mm
- Total length
- 400mm
- Application width
- 300mm
- grip width
- 50+50mm
- material
- stainless steel
90μm
Wire rod
Introduction
Jinlong Machinery Wire Bar is a filament-wound coating rod, which is used for coating film preparation sample like the RDS wire rod, and is suitable for users who do not have high requirements for coating film accuracy to do experiments, and the coating film is uniform. The thickness of the wet film that can be prepared by 90μm wire rod is 90 microns, in order to prevent the wire rod from rusting and improve the wear resistance of the wire rod, the surface of the 90 micron wire rod of Jinlong Machinery contains electroplating.
Parameters
| Model | Wire diameter (mm) | Wet film thickness (μm) | Length (mm) | Diameter (mm) | remark |
| 90μm | 1 | 90 | 400 | 10 | Electroplated included |
Actual picture of the product
FAQ
QThe solid content of the product is 18%, and the dry-film thickness after scraping should be 16 microns. Can this film applicator?
A
Sure
Knowledge
- 1What is Coating Ratio?
- 2What is the covering power and how is it measured?
- 3Wire Bar _ Spreader (Spreader Tool) Category
- 4What are the advantages of Spreader?
- 5Code of use for coating rods
- 6Spreader wet film thickness conversion
- 7Preparation method of film
- 8Comparison of Film Applicators of the same thickness of wet film of several popular brands
- 9Coating construction performance testing Application instrument type summary