JINLONG 110μm wire rod
The Wire diameter of the JINLONG 110μm wire rod is 1.2mm.
Model：
Similar products
JinLong 110μm Wire rod ·SPEC
JinLong 110μm Wire rod ·Details
JinLong 110μm Wire rod ·Packing list
- SKU
- NB000965
- Production process
- Wire-wound
- WFT
- 110μm
- diameter
- 10mm
- Total length
- 400mm
- Application width
- 300mm
- grip width
- 50+50mm
- material
- stainless steel
110μm
Wire rod ·
Introduction
Jinlong Machinery 110μm wire rod can be coated with a thickness of 110 microns, and the diameter of the winding steel wire is 1.2mm, which is used to prepare a wet film of a specific thickness to determine the hiding power, color and other properties of the wet film or for the preparation of a sample, and can also be used for leveling and sagging experiments, the coating film is uniform, and the manual coating is simple and convenient!
Parameters
| Model | Wire diameter (mm) | Wet film thickness (μm) | Length (mm) | Diameter (mm) | remark |
| 110μm | 1.2 | 108 | 400 | 10 | Electroplated included |
Actual picture of the product
FAQ
QIs it feasible to prepare PTFE/PP composite diaphragm with Mayer-Rod?
A
Yes, by diluting to a reasonable PTFE emulsion, Stir a suitable binder uniformly, a single-layer film is prepared on the PP film, and after the composite diaphragm is initially dried, it is placed in a 60 ° C constant temperature bellows for drying, and the solvent evaporates. It is worth PTFE/PP composite diaphragm.
QThe solid content is almost 44%. I want to make Dry-Film 48 microns. Is this model suitable?
A
suitable
Knowledge
- 1What is the covering power and how is it measured?
- 2Wire Bar _ Spreader (Spreader Tool) Category
- 3What are the advantages of Spreader?
- 4Code of use for coating rods
- 5Spreader wet film thickness conversion
- 6Coating construction performance testing Application instrument type summary
- 7Preparation method of film