Lichen Technology DHS-10A Halogen Fast Moisture Meter, weighing value up to 50g

DHS-10A

Halogen rapid Moisture Meter

Moisture accuracy 0.02%, weighing accuracy 0.005g, automatic heating of ordinary halogen lamp at 180 ℃, can be connected to printer, stainless steel heating inner cabin.

The electronic halogen moisture rapid Tester adopts the principle of pyrolysis weight of halogen lamp, which is a rapid moisture detection instrument. While the moisture analyzer measures the weight of the sample, the halogen lamp heating unit and the moisture evaporation channel quickly dry the sample, during the drying process, the Moisture Meter continuously measures and displays the moisture content of the sample in real time%, and after the drying procedure is completed, the final determined moisture content value is locked and displayed.

Compared with the international oven heating method, halogen heating can achieve the maximum heating power in the shortest time, and the sample is quickly dried at high temperature, and the detection results are consistent with the national standard oven method, which is replaceable, and the detection efficiency is much higher than that of the oven method. Typical samples can be measured in just a few minutes. And the operation is simple, the test is accurate, and the moisture value, drying value, measurement time, temperature value, and other data can be displayed respectively. And it has the function of connecting with computers and printers.

Features

◇ The automatic heating cabin door is double-driven and ultra-silent to open to prevent the impact of artificial lifting of the lid on the weighing, and at the same time meet the requirements of automatic detection.

◇ 5-inch high-definition intelligent touch screen, real-time dynamic analysis of curves, moisture percentage/dry weight percentage/dry weight weight directly displayed.

◇ 180°C ultimate heating temperature to meet the test of most samples.

◇ 9 sets of recent test records, test results can be retrieved and printed at any time.

◇ It can meet the maximum capacity of 110g.

◇ Port load cell.

◇ Stainless steel heats the inner chamber to improve the efficiency of sample testing.

Serial models

Packing list：complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.