TQC AB3066 engraving coating rod 76μm WFT application width 320mm
TQC engraving coating rod AB3066 is suitable for Spreader 76 μm thick wet-film, made of stainless steel, AB3066 engraving coating rod rod Total length of 440mm, each end has a 60mm long grip part.
Model：
TQC sheen AB3066 Mayer RodsSPEC
TQC sheen AB3066 Mayer RodsDetails
TQC sheen AB3066 Mayer RodsPacking list
- SKU
- NB009835
- Production process
- Wire-wound
- WFT
- 76μm
- Total length
- 440mm
- Application width
- 320mm
- grip width
- 60+60mm
- material
- stainless steel
AB3066
Mayer Rods
Introduction
The coating width of the Dutch TQC filament wound engraving coating rod is 320mm, and the thickness of the wet film that can be prepared is 4~200μm.
Wire bar applicators, also known as threaded wire bars, are ideal for preparing films on paper or plastic. In addition, it is also suitable for film making on soft substrates. TQC engraving coating rod is made of stainless steel, which has good acid and alkali resistance. The engraved applicator can be used in conjunction with the automatic coater.
Product parameters
| Model | Wet film thickness | Coating width | Overall length | Straightness | Material | craft |
| AB3050 | 4μm | 320 mm | 440mm | < 50 μm | stainless steel | Winding |
| AB3051 | 6μm | |||||
| AB3052 | 8μm | |||||
| AB3053 | 10μm | |||||
| AB3054 | 12μm | |||||
| AB3055 | 14μm | |||||
| AB3056 | 15μm | |||||
| AB3057 | 20μm | |||||
| AB3058 | 24μm | |||||
| AB3059 | 30μm | |||||
| AB3060 | 34μm | |||||
| AB3061 | 42µm | |||||
| AB3062 | 40μm | |||||
| AB3063 | 50μm | |||||
| AB3064 | 56μm | |||||
| AB3065 | 60μm | |||||
| AB3066 | 76μm | |||||
| AB3067 | 100μm | |||||
| AB3068 | 120μm | |||||
| AB3069 | 200μm |
Optional
|
|
|
FAQ
QCan silicone coatings be applied to quartz Glass substrates?
A
Yes, choose quartz Glass as the substrate, with Mayer Rods Coating prepared above coated on the surface of the treated quartz Glass substrate, at room temperature to evaporate the solvent into the oven, at a certain temperature curing film formation.
QSolid content of the sample is 40%, Dry-Film is 30 microns, do you have any suggestions?
A
This one is fine.