TQC AB3069 imported coating bar 200μm WFT stainless steel
The TQC imported coating bar AB3069 is a Coating bar for laboratory proofing, the preparatory wet film thickness is 200μm, AB3069 imported coating bar is suitable for paper, plastic and other substrate preparatory film.
Model：
Similar products
TQC sheen AB3069 Mayer RodsSPEC
TQC sheen AB3069 Mayer RodsDetails
TQC sheen AB3069 Mayer RodsPacking list
- SKU
- NB009838
- Production process
- Wire-wound
- WFT
- 200μm
- Total length
- 440mm
- Application width
- 320mm
- grip width
- 60+60mm
- material
- stainless steel
AB3069
Mayer Rods
Introduction
The coating width of the Dutch TQC wire-wound imported scraper is 320mm, and the thickness of the wet film that can be prepared is 4~200μm.
Wire bar applicators, also known as threaded wire bars, are ideal for preparing films on paper or plastic. In addition, it is also suitable for film making on soft substrates. TQC imported scraper is made of stainless steel, which has good acid and alkali resistance. The imported scraper can be used for the automatic coating machine.
Product parameters
| Model | Wet film thickness | Coating width | Overall length | Straightness | Material | craft |
| AB3050 | 4μm | 320 mm | 440mm | < 50 μm | stainless steel | Winding |
| AB3051 | 6μm | |||||
| AB3052 | 8μm | |||||
| AB3053 | 10μm | |||||
| AB3054 | 12μm | |||||
| AB3055 | 14μm | |||||
| AB3056 | 15μm | |||||
| AB3057 | 20μm | |||||
| AB3058 | 24μm | |||||
| AB3059 | 30μm | |||||
| AB3060 | 34μm | |||||
| AB3061 | 42µm | |||||
| AB3062 | 40μm | |||||
| AB3063 | 50μm | |||||
| AB3064 | 56μm | |||||
| AB3065 | 60μm | |||||
| AB3066 | 76μm | |||||
| AB3067 | 100μm | |||||
| AB3068 | 120μm | |||||
| AB3069 | 200μm |
Optional
|
|
|
FAQ
QWe are doing printing materials, customers are now asking manual Spreader stick Spreader Film thickness 0.2mm Spreader Film thickness 0.3mm have it?
A
Is the Spreader Film thickness wet film thickness or thickness of dry film you are referring to? If it is a wet film, the 200 to 300 μm series should be selected, but the Mayer Rods are up to 200 μm. If it is a thickness of dry film, Mayer Rods are not required for this range. The main purpose of the Spreader stick is to control the "accurate" wet film. Generally, the film thickness can be adjustable Film Applicator or I-type Film Applicator.
QSolid content 10%, expected to make Dry-Film 20 microns, this stick number is OK?
A
Sure