Qiwei FJ200-S Digital Display High Speed Homogenizer 200W

FJ200-S

Homogenizer (digital display high speed)

Introduction

Qiwei FJ200-S homogenizer is also called adjustable high-speed homogenizer. The motor power is 200W. FJ200-S homogenizer Hall element speed measurement adopts a professional electronic circuit, the digital display is clear, and it is easy to use. FJ200-S Homogenizer is suitable for biological experiments, it can stir and mix animal and plant tissues or rupture cell membranes and separate nuclei.

Features

1. FJ200-S homogenizer speed digital display, intuitive reading.

2. It adopts internal suction homogeneous structure and high speed. It can effectively homogenize and emulsify two immiscible liquids, extract trace organic compounds in water, fat-soluble substances and soluble substances in organic solvents.

3. The homogenizer can homogenize and mix various animal and plant tissues.

4. At low speed, it can be used as a stirrer.

5. It can break the cell membrane until the nucleus is separated, and can break the DNA chain at different speeds, or break the macromolecular substances into small molecular substances.

Instructions

1) Put the FJ200-S homogenizer on a horizontal workbench, and install the required homogenizing tools in place.

2) Test machine. Use a cup or vessel filled with water to submerge the plum blossom cutter head in the water, turn on the power switch, and adjust the speed knob from slow to fast. There is no obvious metal friction sound, and then it can work. If there is a sound of metal friction, turn off the switch, loosen the tool, turn the tool fixing sleeve randomly, install it in place, and then tighten it.

3) Cut the plants or organisms to be experimented into small pieces or slices, and put them in the randomly equipped glassware.

4) Adjust the fixed motor seat knob of the FJ200-S homogenizer, and slowly align it with the mouth of the vessel and move it down so that the homogenizer head is 1-2 cm away from the bottom of the vessel, and then tighten the fixed motor knob . more than 5 minutes.

maintenance measures

1. The tool is a wearing part that needs to be repaired or replaced.

2. After the work is finished, remove the tool and rinse it with clean water and dry it.

3. Pay attention to safety when the homogenizer is running at high speed.

Pictures

Packing list：Host x1, Certificate x1, Manual x1, Encasement box x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.