GB/T 33978-2017 《Proton exchange membrane fuel cell modules for road vehicles》 Related products
This standard specifies the technical requirements and test methods for proton exchange membrane fuel cell modules used in road vehicles. It covers the evaluation criteria during the design, manufacture, installation and use of the module to ensure the safety, Reliability and performance Stability of proton exchange membrane fuel cell modules in vehicle Power systems, and to promote the promotion and application of related technologies in road vehicle applications.
This summary is not the original standard text and is for reference only. For accurate information, please obtain it through official channels.
| Status | Active |
|---|---|
| CCS | K82 | ICS | 27.070 |
| Release Date | 2017-07-12 00:00:00 | Implementation Date | 2018-02-01 00:00:00 |
Extended reading
- 1GB/T 33896-2017《Test method for cyclic pressure of membrane housing》
- 2GB/T 33893-2017《Determination of perfluorooctane sulfonates(PFOS) and perfluorooctanoic acid(PFOA) for separation membranes—Liquid chromatography-tandem mass spectrometry method》
- 3GB/T 34242-2017《Test methods for nanofiltration membranes》
- 4GB/T 34241-2017《Spiral wound composite polyamide reverse osmosis membrane element》
- 5GB/T 34872-2017《Technical requirement of hydrogen supply system for proton exchange membrane fuel cells》
- 6GB/T 35250-2017《Intermetallic compound film filter》
- 7GB/T 35847-2018《Switchable glazing filmed by polymer dispersed liquid crystal》
- 8GB/T 36118-2018《Filter elementsof pleated polytetrafluoroethylene microfiltration membrane for gas sterilizing》
- 9GB/T 8013.3-2018《Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 3: Organic polymer coatings》
- 10GB/T 8013.2-2018《Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 2: Combined coatings》