BS EN ISO 6504-3-2019 《Paints and varnishes. Determination of hiding power. Determination of hiding power of paints for masonry, concrete and interior use》 Related products
The BS EN ISO 6504-3-2019 standard provides a method for determining the hiding power of layers of white or light paints for masonry, concrete and interior paints. The standard involves applying Coatings to black and white charts or colorless transparent foils and calculating the hiding power based on the tristimulus values Y and Y10 (both greater than 25). Also included is a simple method for calculating the paving rate of Coatings with low volatile matter content, such as interior-wall and ceiling Coatings.
This summary is not the original standard text and is for reference only. For accurate information, please obtain it through official channels.
| Status | Active |
|---|---|
| CCS | ICS | (87.040) 涂料和清漆 |
| Release Date | 2020-01-03 00:00:00 | Implementation Date | 2020-01-03 00:00:00 |
-
$ 87.00 -
$ 89.00 -
$ 86.00 -
$ 87.00 -
$ 133.00
Extended reading
- 1NF T30-075-2017《Paints and varnishes - Determination of hiding power》
- 2T/ZZB 2436-2021《》
- 3BS 6222-3-2017《Domestic kitchen equipment. Performance requirements for durability of surface finish and adhesion of surfacing and edging materials. Specification》
- 4ISO 13805-1999《Virtreous and Porcelain Enamels for Aluminium - Determination of the Adhesion of Enamels on Aluminium under the Action of Electrolytic Solution (Spall Test) (First Edition)》
- 5EN ISO 26443-2016《Fine ceramics (advanced ceramics, advanced technical ceramics) - Rockwell indentation test for evaluation of adhesion of ceramic coatings (ISO 26443:2008)》
- 6EN ISO 20502-2016《Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of adhesion of ceramic coatings by scratch testing (ISO 20502:2005 including Cor 1:2009)》
- 7ISO/TS 16774-4-2016《Test methods for repair materials for water-leakage cracks in underground concrete structures - Part 4: Test method for adhesion on wet concrete surface (First Edition)》
- 8BS 903-A27-1986《Physical testing of rubber. Determination of rubber to fabric adhesion. Direct tension method》
- 9NF A92-131-2009《Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)》
- 10NF A91-140-2018《Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion》