ASTM D92-2018 《Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester》 Related products
The ASTM D92-2018 standard specifies a method for determining the flash point and ignition point of petroleum products using manual or automated Cleveland cup openers. The flash point is the minimum temperature at which a petroleum product forms a combustible mixture and comes into contact with air to produce an instantaneous flash fire when it comes into contact with a flame; the ignition point is the minimum temperature at which a petroleum product continues to burn for at least 5 seconds. This test is important for evaluating the flammability and safe transportation of materials.
This summary is not the original standard text and is for reference only. For accurate information, please obtain it through official channels.
| Status | Active |
|---|---|
| CCS | ICS | (13.220.40) 材料和制品的阻燃性和燃烧性能 , (75.080) 石油产品综合 |
| Release Date | 2018-07-01 00:00:00 | Implementation Date | 2018-08-01 00:00:00 |
-
$ 2558.00 -
$ 2558.00 -
$ 2838.00 -
$ 2838.00
Extended reading
- 1IP 170-1999《Petroleum products and other liquids -- Determination of flash point -- Abel closed cup method》
- 2DIN EN 924-2003《Adhesives - Solvent-borne and solvent-free adhesives - Determination of flashpoint》
- 3BS EN 924-2003《Adhesives. Solvent-borne and solvent-free adhesives. Determination of flashpoint》
- 4IP 534-2006《Determination of flash point - Small scale closed cup ramp method》
- 5ISO/TR 140-989-2009《Petroleum products and other liquids. Guidance for flash point testing》
- 6ISO/TR 11018-1997《Essential Oils - General Guidance on the Determination of Flashpoint (First Edition)》
- 7TCVN 8459-2010《Essential oils.General guidance on the determination of flashpoint.》
- 8ISO 2719-2016《Determination of flash point - Pensky-Martens closed cup method》
- 9SN/T 3077.1-2012《Test method for flash point by continuously closed cup tester》
- 10SN/T 3077.2-2012《Test method of flash point.Modified continuously closed cup tester》