JB/T 10058-2000 《Specification of flame photometer》 Related products
This standard specifies the requirements for Flame photometers, including test methods, inspection rules, signs, Encasement, transportation and storage. Applicable to all kinds of Flame photometers, the instrument is required to work normally under specific environment conditions, Appearance is free of obvious defects, insulation resistance, insulation strength and leakage current and other indicators meet the regulations.
This summary is not the original standard text and is for reference only. For accurate information, please obtain it through official channels.
| Status | Active |
|---|---|
| CCS | (N53) 电化学、热化学、光学式分析仪器 | ICS | (71.040.01) 分析化学综合 |
| Release Date | 2000-08-15 00:00:00 | Implementation Date | 2000-10-01 00:00:00 |
-
$ 1450.00
Extended reading
- 1DZ/T 0183-1997《General technical requirements for atomic fluorescence photometer》
- 2JB/T 6242-2005《Fluorescence photometer》
- 3JB/T 4279.15-2008《Verificafion procedure for test equipment of enamelled winding wire.Part 15: To-and-fro scraping tester》
- 4JB/T 4279.7-2008《Verification procedure for test equipment of enamelled winding wire.Part 7:Forced circulating-air oven》
- 5JB/T 4279.9-2008《Verification procedure for test equipment of enamelled winding wire.Part 9:Unidirectional scraping tester》
- 6JB/T 4279.8-2008《Verification procedure for test equipment of enamelled winding wire.Part 8:Cut-through tester》
- 7JB/T 4279.10-2008《Verification procedure for test equipment of enamelled winding wire.Part 10:Tester for resistance to solvents》
- 8JB/T 4279.6-2008《Verification procedure for test equipment of enamelled winding wire.Part 6:Peeling tester》
- 9QB/T 1669-1992《Canadian Standard Freeness Meter》
- 10JB/T 20104-2022《Tablet Hardness Tester》