This specification specifies the requirements of graphene anticorrosive coatings, mass assurance provisions and delivery preparation, etc., which are applicable to the design, production and inspection acceptance of graphene anticorrosive coatings for electronic equipment. A series of standard documents are cited, including Paints and varnish aging rating methods, neutral salt spray performance determination, tensile adhesion test, etc. The materials required for Coating should meet the requirements of the verification documents. The main components include graphene, zinc powder and film formation. In terms of Appearance, the coating should cover all the areas required for painting in the design drawings. Color should meet the technical requirements. The surface should be uniform and flat, free of defects, and slight orange lines are allowed. Coating thickness should not be less than 80um, the maximum thickness does not exceed 120um.
| Status | Active |
|---|---|
| CCS | ICS |
| Release Date | 2021-12-27 00:00:00 | Implementation Date | 2022-03-01 00:00:00 |