JSA JIS K 5600-1-6 《Testing methods for paints - Part 1: General rule - Section 6: Temperatures and humidities for conditioning and testing》 Related products

The JSA JIS K 5600-1-6: 1999 standard specifies the temperature and relative humidity conditions that should be used for coatings and their raw materials during regulation and testing. The standard applies to liquid or powder coatings, wet or drying coatings and their raw materials. The standard recommends regulation and testing in an environment of (23 +/- 2) ° C and (50 +/- 5) % relative humidity. For some tests, a tighter temperature control range may be required, for example for viscosity measurement, it is recommended to control within +/- 0.5 ° C. If it is difficult to maintain standard conditions in a particular country or region, or for non-judgmental purposes, Miscellaneous conditions may be used, but they must be clearly stated in the test report. In addition, the specimen shall be conditioned under the specified conditions until it reaches an equilibrated state, and the test shall be carried out under the same conditions.