ISO 12947-1 《Textiles - Determination of the Abrasion resistance of Fabrics by the martindale method - Part 1: Martindale Abrasion testing apparatus》 Related products
ISO 1 2947-1 is an international standard for abrasion resistance testing of Spinning & weaving products, specifying the technical requirements for Martindale abrasion testing devices. This standard provides the basic equipment specification for subsequent abrasion resistance testing (such as specimen damage, mass loss and Appearance change). Martindale testing devices evaluate the wear resistance of fabrics by simulating the friction of fabrics in actual use. The standard is applicable to a variety of Spinning & weaving products such as woven fabrics, knitted fabrics, and non-woven fabrics, providing an important equipment basis for quality control and performance evaluation of Spinning & weaving products.
This summary is not the original standard text and is for reference only. For accurate information, please obtain it through official channels.
| Status | Active |
|---|---|
| CCS | ICS |
| Release Date | Implementation Date |
-
$ 1599.00 -
$ 1656.00 -
$ 2872.00 -
$ 2176.00 -
$ 2822.00 -
$ 2628.00 -
$ 2239.00 -
$ 2434.00
Extended reading
- 1IEC 60068-2-78《Environmental testing – Part 2-78: Tests – Test Cab: Damp heat, steady state》
- 2ISO 9022-23《Optics and photonics - Environmental test methods - Part 23: Low pressure combined with cold, ambient temperature and dry or damp heat》
- 3IEC 60068-2-67《Environmental testing – Part 2-67: Tests – Test Cy: Damp heat, steady state, accelerated test primarily intended for components》
- 4IEC 60068-2-66《Environmental Testing - Part 2: Test Methods - Test Cx: Damp Heat, Steady State (Unsaturated Pressurized Vapour)》
- 5ISO 4611《Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist》
- 6ISO 14993《Corrosion of metals and alloys - Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions》
- 7JSA JIS C 8930《Salt mist corrosion testing of photovoltaic (PV) modules》
- 8ISO 9022-4《Optics and photonics - Environmental test methods - Part 4: Salt mist》
- 9IEC 61701《Photovoltaic (PV) modules – Salt mist corrosion testing》
- 10ASTM D7030-04《Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine》