ISO DIS 11856 《Textile floor coverings - Test methods for the determination of fibre bind using a modified martindale machine》 Related products
ISO DIS 11856 is a draft international standard for the determination of the fibre bond of Spinning & weaving floor coverings, which is tested using a modified Martindale machine. The standard specifies a method for evaluating the fibre bond strength of Spinning & weaving floor coverings such as carpets using a modified Martindale machine. By simulating the abrasion in actual use, the mass loss or Appearance change of the fibres after a specific number of rubs is measured. It is suitable for all types of cut pile carpets and Spinning & weaving floor coverings with high wool content, providing an important basis for product quality control and performance evaluation.
This summary is not the original standard text and is for reference only. For accurate information, please obtain it through official channels.
| Status | Active |
|---|---|
| CCS | ICS | 59.080.60 |
| Release Date | 2016-11-09 00:00:00 | Implementation Date |
-
$ 1599.00 -
$ 1656.00 -
$ 2872.00 -
$ 2176.00 -
$ 2822.00 -
$ 2628.00 -
$ 2239.00 -
$ 2434.00
Extended reading
- 1ISO 12947-1《Textiles - Determination of the Abrasion resistance of Fabrics by the martindale method - Part 1: Martindale Abrasion testing apparatus》
- 2IEC 60068-2-78《Environmental testing – Part 2-78: Tests – Test Cab: Damp heat, steady state》
- 3ISO 9022-23《Optics and photonics - Environmental test methods - Part 23: Low pressure combined with cold, ambient temperature and dry or damp heat》
- 4IEC 60068-2-67《Environmental testing – Part 2-67: Tests – Test Cy: Damp heat, steady state, accelerated test primarily intended for components》
- 5IEC 60068-2-66《Environmental Testing - Part 2: Test Methods - Test Cx: Damp Heat, Steady State (Unsaturated Pressurized Vapour)》
- 6ISO 4611《Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist》
- 7ISO 14993《Corrosion of metals and alloys - Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions》
- 8JSA JIS C 8930《Salt mist corrosion testing of photovoltaic (PV) modules》
- 9ISO 9022-4《Optics and photonics - Environmental test methods - Part 4: Salt mist》
- 10IEC 61701《Photovoltaic (PV) modules – Salt mist corrosion testing》