ISO 5470-2 《Rubber or Plastics Coated Fabrics - Determination of Abrasion Resistance - Part 2: Martindale Abrader》 Related products
ISO 5470-2 is an international standard for the determination of the wear resistance of rubber or plastic coated fabrics, focusing on testing using the Martindale abrasive method. The standard contains both dry and wet wear test methods, which are suitable for coated fabric surfaces, but not for uncoated surfaces. By simulating the friction conditions in actual use, the standard can effectively evaluate the wear resistance of coated fabrics, and the test results can be used for quality control and product development.
This summary is not the original standard text and is for reference only. For accurate information, please obtain it through official channels.
| Status | Active |
|---|---|
| CCS | ICS | 59.080.40 |
| Release Date | 2003-04-15 00:00:00 | Implementation Date |
-
$ 1599.00 -
$ 1656.00 -
$ 2872.00 -
$ 2176.00 -
$ 2822.00 -
$ 2628.00 -
$ 2239.00 -
$ 2434.00
Extended reading
- 1ISO 12947-2《Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown》
- 2ISO 17076-2《Leather - Determination of abrasion resistance - Part 2: Martindale ball plate method》
- 3ISO DIS 11856《Textile floor coverings - Test methods for the determination of fibre bind using a modified martindale machine》
- 4ISO 12947-1《Textiles - Determination of the Abrasion resistance of Fabrics by the martindale method - Part 1: Martindale Abrasion testing apparatus》
- 5IEC 60068-2-78《Environmental testing – Part 2-78: Tests – Test Cab: Damp heat, steady state》
- 6ISO 9022-23《Optics and photonics - Environmental test methods - Part 23: Low pressure combined with cold, ambient temperature and dry or damp heat》
- 7IEC 60068-2-67《Environmental testing – Part 2-67: Tests – Test Cy: Damp heat, steady state, accelerated test primarily intended for components》
- 8IEC 60068-2-66《Environmental Testing - Part 2: Test Methods - Test Cx: Damp Heat, Steady State (Unsaturated Pressurized Vapour)》
- 9ISO 4611《Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist》
- 10ISO 14993《Corrosion of metals and alloys - Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions》