ASTM E110-14(2023) 《Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers》 Related products
ASTM E110-14 (2023) is a standard test method for the determination of Rockwell and Brinell hardness of metallic materials using a portable hardness tester. The standard is suitable for hardness testing of metallic materials in the field or outside the laboratory, especially when the size or weight of the specimen is not suitable for traditional hardness timing. The standard specifies in detail the technical requirements, test procedures and verification methods of portable hardness testers to ensure that the test results are consistent with the standard Rockwell (ASTM E18) and Brinell (ASTM E10) hardness test methods.
This summary is not the original standard text and is for reference only. For accurate information, please obtain it through official channels.
| Status | Active |
|---|---|
| CCS | ICS | 77.040.10 |
| Release Date | 2023-01-01 00:00:00 | Implementation Date |
Extended reading
- 1GB/T 713.2-2023《Steel plate，sheet and strip for pressure equipments—Part 2：Non-alloy and alloy steel with specified temperature properties》
- 2DIN 53505《Shore A and Shore D hardness testing of rubber》
- 3TAPPI T 538《Roughness of paper and paperboard (Sheffield method)》
- 4TAPPI T 826《Short span compressive strength of containerboard》
- 5TAPPI T 544《Aging of paper and board with moist heat》
- 6TAPPI T 211《Ash in wood, pulp, paper and paperboard: combustion at 525°C》
- 7TAPPI T 432《Water absorbency of bibulous papers》
- 8TAPPI TIP 0304-07《Cross direction warp in corrugated board》
- 9TAPPI T 261《Fines fraction by weight of paper stock by wet screening》
- 10TAPPI T 431《Ink absorbency of blotting paper》