ASTM D56-22 《Standard Test Method for Flash Point by Tag Closed Cup Tester》 Related products
ASTM D56-22 is a standard test method for determining the flash point of liquids using a Tag closed cup flashpoint tester. It is suitable for liquid samples with a flash point below 93 ° C (200 ° F). The standard specifies in detail the test equipment, sample preparation, test procedures and method for calculating results to ensure the accuracy and repeatability of test results. Flash point refers to the minimum temperature at which a liquid releases enough vapor to form a flammable mixture with air under specific conditions. It is an important indicator for evaluating the flammability and safety of liquids. ASTM D56-22 is suitable for quality control and security evaluation of petroleum products, solvents and Miscellaneous volatile liquids. It is widely used in chemical, petroleum and transportation fields.
| Status | Active |
|---|---|
| CCS | ICS | 87.040 |
| Release Date | 2022-07-01 00:00:00 | Implementation Date |
- 1ASTM D3393-91(2022)《Standard Specification for Coated Fabrics—Waterproofness》
- 2ASTM D256-23e1《Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics》
- 3ASTM E110-14(2023)《Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers》
- 4GB/T 713.2-2023《Steel plate，sheet and strip for pressure equipments—Part 2：Non-alloy and alloy steel with specified temperature properties》
- 5DIN 53505《Shore A and Shore D hardness testing of rubber》
- 6TAPPI T 538《Roughness of paper and paperboard (Sheffield method)》
- 7TAPPI T 826《Short span compressive strength of containerboard》
- 8TAPPI T 544《Aging of paper and board with moist heat》
- 9TAPPI T 211《Ash in wood, pulp, paper and paperboard: combustion at 525°C》
- 10TAPPI T 432《Water absorbency of bibulous papers》