ASTM B866-95(2018) 《Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion》 Related products
This standard describes a method for testing total defects and mechanical damage in metallic coatings using alkaline polysulfide solutions. This test is used to detect the presence of serious defects and abrasions in coatings, especially damage to copper or copper alloy substrates. It is suitable for various metallic coatings, such as tin plating, nickel plating, etc. The test is less sensitive to small holes and is mainly used to identify serious defects in coatings. It is not suitable for general porosity testing.
This summary is not the original standard text and is for reference only. For accurate information, please obtain it through official channels.
| Status | Active |
|---|---|
| CCS | ICS |
| Release Date | Implementation Date |
-
$ 481.00
Extended reading
- 1ASTM B877-96(2018)《Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method》
- 2ASTM B905-00(2021) 《Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test》
- 3ASTM B975-22《Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)》
- 4ASTM B995-15a(2021)《Standard Test Method for Chloride Resistance Test for Chromium Electroplated Parts (Russian Mud Test)》
- 5ASTM D711-23《Standard Test Method for No-Pick-Up Time of Pavement Markings》
- 6ASTM D713-23《Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials》
- 7ASTM D868-21《Standard Practice for Determination of Degree of Bleeding of Traffic Paint》
- 8ASTM D913-20《Standard Practice for Evaluating Degree of Pavement Marking Line Wear》
- 9ASTM D1155-10(2020) 《Standard Test Method for Roundness of Glass Spheres》
- 10ASTM D1214-10(2020) 《Standard Test Method for Sieve Analysis of Glass Spheres》