ASTM B578-21 《Standard Test Method for Microindentation Hardness of Electroplated Coatings》 Related products
The ASTM B578-21 standard specifies a test method for the determination of microhardness of Eletroplating coatings. Hardness measurement of metallic coatings under a specific load (0.245N or 0.981N) is performed using a Knoop indenter in the test. The results are reported as Knoop Hardness Value (HK). The standard applies to metallic coatings on a variety of substrates, ensuring conformity and Reliability of measurements. Users should establish appropriate safety and health practices and follow relevant regulations when using this standard.
This summary is not the original standard text and is for reference only. For accurate information, please obtain it through official channels.
| Status | Active |
|---|---|
| CCS | ICS |
| Release Date | Implementation Date |
-
$ 335.00 -
$ 607.00 -
$ 1470.00 -
$ 630.00 -
$ 1729.00 -
$ 271.00 -
$ 274.00 -
$ 271.00 -
$ 271.00
Extended reading
- 1ASTM B602-21《Standard Guide for Attribute Sampling of Metallic and Inorganic Coatings》
- 2ASTM B636/B636M-15(2021)《Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer》
- 3ASTM B659-90(2021)《Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings》
- 4ASTM B678-23《Standard Test Method for Solderability of Metallic-Coated Products》
- 5ASTM B697-88(2021) 《Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings》
- 6ASTM B748-90(2021)《Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope》
- 7ASTM B762-21《Standard Guide of Variables Sampling of Metallic and Inorganic Coatings》
- 8ASTM B764-04(2021)《Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)》
- 9ASTM B765-03(2023)《Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings》
- 10ASTM B767-88(2021)《Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures》