ASTM D1310-14(2021) 《Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus》 Related products
The ASTM D1310-14 (2021) standard specifies a method for determining the flash point and ignition point of liquids using a Tiger open cup device. The method is suitable for determining the flash point and ignition point of liquids with a flash point between -18 and 165 ° C. Although the method has poor reproducibility for readily skinning or viscous paints and Resin solutions, heating can be continued to determine the ignition point by the label open cup method. This standard provides an important reference for the definition of flammability hazards of liquids, but is not applicable to describing fire hazards under actual fire conditions.
This summary is not the original standard text and is for reference only. For accurate information, please obtain it through official channels.
| Status | Active |
|---|---|
| CCS | ICS |
| Release Date | Implementation Date |
-
$ 2558.00 -
$ 2558.00 -
$ 2838.00 -
$ 2838.00 -
$ 2465.00 -
$ 2682.00
Extended reading
- 1ASTM D4587-23《Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings》
- 2ASTM F1843-15《Standard Practice for Sample Preparation of Plastic Films used on Membrane Switch Overlays for Specular Gloss Measurements (Withdrawn 2024)》
- 3ASTM D1455-17(2023)《Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish》
- 4QB/T 1950-2013《Determination of resistance to salt water of furniture surface coatings》
- 5HG/T 20569-2013《Mechanical mixing equipment》
- 6GB/T 33546-2017《General technica standard of electromagnetic stirrer》
- 7GB/T 17657-2013《Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels》
- 8GB/T 15102-2017《Surface decorated fiberboard and particleboard with paper impregnated thermosetting resins》
- 9JB/T 7796-2005《Tension and compression spring testing machines》
- 10JB/T 7796-2017《Tension and compression spring testing machines》