GB/T 22363-2008 《Paper and board - Determination of roughness (air leak methods) - Bendtsen method and print-surf method》 Related products
The GB/T 22363-2008 standard describes two methods for measuring paper and Cardboard asperity: the Bentsen method and the printing surface method. The Bentsen method is suitable for paper and Cardboard with asperity between 50 mL/min and 1200 mL/min, while the printing surface method is suitable for printing paper and Cardboard that can form a good sealing with the probe. The standard specifies the scope and limitations of each method, providing a standardized test method for the accurate assessment of paper surface roughness.
This summary is not the original standard text and is for reference only. For accurate information, please obtain it through official channels.
| Status | Active |
|---|---|
| CCS | Y30 | ICS | 85.010 |
| Release Date | 2008-08-19 00:00:00 | Implementation Date | 2009-05-01 00:00:00 |
-
$ 692.00 -
$ 817.00 -
$ 692.00
Extended reading
- 1GB/T 12914-2018《Paper and board—Determination of tensile properties—Constant rate of elongation method(20mm/min)》
- 2GB/T 12910-1991《Paper and board--Determination of titanium dioxide》
- 3GB/T 12661-2008《Paper and board - Determination of microbiological properties - Total bacterial count》
- 4GB/T 10342-2002《Paper--Package and mark》
- 5GB/T 10340-2008《Paper and board - Determination of filtering rate》
- 6GB/T 10335.5-2008《Coated paper and board - Coated linerboard》
- 7GB/T 2679.14-1996《Filter paper and filterboard--Determinationof maximum pore diameter》
- 8GB/T 3679.10-1993《Hot-rolled steel plates - Part 10: Carbon and low-alloy structural steel plates》
- 9GB/T 1541-2013《Paper and board - Determination of dirt》
- 10GB/T 742-2018《Fibrous raw material, pulp, paper and board—Determination of residue(ash) on ignition at 575℃ and 900℃》